首页> 外文期刊>Arabian Journal for Science and Engineering >Relative Permeability Model Taking the Roughness and Actual Fluid Distributions into Consideration for Water Flooding Reservoirs
【24h】

Relative Permeability Model Taking the Roughness and Actual Fluid Distributions into Consideration for Water Flooding Reservoirs

机译:考虑注水油藏糙率和实际流体分布的相对渗透率模型

获取原文
获取原文并翻译 | 示例
       

摘要

Reservoir relative permeability is greatly important to the development of water flooding reservoirs. Currently, most researches on relative permeability have not taken the roughness of pore surface and actual fluid distributions into consideration. In this paper, a novel relative permeability model for water flooding reservoirs taking the roughness and actual fluid distributions into consideration has been proposed by using the fractal theory. The novel model contains some key parameters, all of which have clear physical meanings, such as the immobile liquid film thickness, relative roughness, tortuosity fractal dimension D-T and pore fractal dimension D-f. The predicted results of the novel fractal relative permeability model are consistent with published experimental data. That verifies the correctness of the novel fractal relative permeability model. Finally, sensitive factor analysis of novel relative permeability model is conducted. We can find that the wetting fluid relative permeability decreases as the immobile wetting fluid film thickness or relative roughness increases. When the tortuosity fractal dimension or pore fractal dimension increases, the wetting relative permeability and non-wetting relative permeability will both decrease. An increase in maximum pore diameter or the decreasing of minimum pore diameter results in the reduction in fractal dimension of flow channel and discontinuous saturation. The increasing of maximum pore diameter results in an increase in the relative permeability of wetting fluid. The minimum pore diameter has tiny effect on the relative permeability.
机译:储层相对渗透率对注水油藏的开发具有重要意义。目前,有关渗透率的大多数研究都没有考虑孔隙表面的粗糙度和实际的流体分布。本文利用分形理论,提出了一种兼顾粗糙度和实际流体分布的注水油藏相对渗透率模型。新模型包含一些关键参数,所有这些参数都有明确的物理含义,例如固定的液膜厚度,相对粗糙度,曲折形分形维数D-T和孔形分形维数D-f。新的分形相对渗透率模型的预测结果与已发表的实验数据一致。这验证了新型分形相对渗透率模型的正确性。最后,对新型相对渗透率模型进行了敏感因素分析。我们可以发现,随着固定式润湿液膜厚度或相对粗糙度的增加,润湿液的相对渗透率会降低。当曲折分形维数或孔隙分形维数增加时,润湿相对渗透率和非润湿相对渗透率都将降低。最大孔径的增加或最小孔径的减小导致流动通道的分形尺寸减小和不连续饱和。最大孔径的增加导致润湿液的相对渗透率增加。最小孔径对相对渗透率的影响很小。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号