首页> 外文期刊>Applied Surface Science >Electrical and optical properties of sol-gel derived La modified PbTiO3 thin films
【24h】

Electrical and optical properties of sol-gel derived La modified PbTiO3 thin films

机译:溶胶-凝胶法制备的La改性PbTiO3薄膜的电学和光学性质

获取原文
获取原文并翻译 | 示例
       

摘要

Lanthanum modified lead titanate (Pb1-xLaxTi1-x/4O3) PLTx (x = 0.08 i.e. PLT8) sol-gel derived thin films have been prepared on indium tin oxide (ITO) coated glass and quartz substrates using lead acetate trihydrate, lanthanum acetate hydrate and titanium isopropoxide as precursors along with 2-methoxyethanol as solvent and acetic acid as catalyst by spin coating method. The microstructure and surface morphology of the films annealed at 650 degreesC have been studied by X-ray diffraction technique and atomic force microscope (AFM). XRD has shown a single phase with tetragonal structure and AFM images have confirmed a smooth and crack-free surface with low surface roughness. The dependence of leakage current on applied voltage show ohmic behavior at low field region with a space charge conduction mechanism at high fields. The wavelength dispersion curve of thin films obtained from the transmission spectrum of thin films show that the films have high optical transparency in the visible region. (C) 2004 Elsevier B.V. All rights reserved.
机译:镧改性的钛酸铅(Pb1-xLaxTi1-x / 4O3)PLTx(x = 0.08,即PLT8)溶胶-凝胶衍生的薄膜已使用三水合乙酸铅,水合乙酸镧在氧化铟锡(ITO)的玻璃和石英基板上制备旋涂法以异丙醇钛为前体,以2-甲氧基乙醇为溶剂,以乙酸为催化剂。通过X射线衍射技术和原子力显微镜(AFM)研究了在650℃退火的薄膜的微观结构和表面形态。 XRD显示具有四方结构的单相,AFM图像已确认具有低表面粗糙度的光滑无裂纹表面。漏电流对施加电压的依赖性在低场区域表现出欧姆行为,在高场具有空间电荷传导机制。由薄膜的透射光谱获得的薄膜的波长色散曲线表明,该薄膜在可见光区域具有高的光学透明性。 (C)2004 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号