首页> 外文期刊>IEEE Transactions on Applied Superconductivity >Superferric Quadrupole Magnet With a Pulse Repetition Rate of 10 Hz for High Energy Particle Accelerators
【24h】

Superferric Quadrupole Magnet With a Pulse Repetition Rate of 10 Hz for High Energy Particle Accelerators

机译:高能量粒子加速器的脉冲重复频率为10 Hz的超铁四极磁体

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The study of superferric synchrotron magnets with a pulse repetition rate up to 20 Hz is performed at the Laboratory of High Energies of the JINR during the last years. The magnet feature is a low inductance superconducting coil made of a high current hollow cable, cooled with two-phase helium flow at 4.5 K. After the successful tests of fast-cycling 1.4 m model dipoles at the field ramp up to 7 T/s, a proper quadrupole is under design and construction. The new magnet yoke length is about 420 mm and the distance between the pole shoes is 90 mm. The cable comprises 24 wires of 0.73 mm diameter are wound around a copper-nickel tube with an outer diameter of 5 mm. The wire consists of 10374 NbTi filaments of 4.2 $mu{rm m}$ diameter. It is expected that the new 32 T/m quadrupole magnet will operate at pulse repetition rate up to 10 Hz providing the field gradient ramp of 600 T/m per second. The first tests have been carried out in August 2006. Status of the work and obtained results are presented and discussed.
机译:最近几年,JINR高能实验室对脉冲重复频率高达20 Hz的超铁同步加速器磁体进行了研究。磁铁的特征是由高电流空心电缆制成的低电感超导线圈,用4.5 K的两相氦气流冷却。成功测试了1.4 m模型偶极子的快速循环后,在现场将其加速至7 T / s ,正在设计和建造合适的四极杆。新的磁轭长度约为420毫米,极靴之间的距离为90毫米。该电缆包括24根直径为0.73 mm的导线,缠绕在外径为5 mm的铜镍管上。焊丝由直径为4.2μm的10374 NbTi细丝组成。预计新的32 T / m四极磁体将以高达10 Hz的脉冲重复频率运行,从而提供每秒600 T / m的磁场梯度斜率。最初的测试已于2006年8月进行。目前的工作状况和获得的结果已得到介绍和讨论。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号