首页> 外文期刊>Applied Energy >Production of bio-jet fuel from corncob by hydrothermal decomposition and catalytic hydrogenation: Lab analysis of process and techno-economics of a pilot-scale facility
【24h】

Production of bio-jet fuel from corncob by hydrothermal decomposition and catalytic hydrogenation: Lab analysis of process and techno-economics of a pilot-scale facility

机译:通过水热分解和催化氢化从玉米芯生产生物喷气燃料:中试规模设施的工艺和技术经济性的实验室分析

获取原文
获取原文并翻译 | 示例
       

摘要

Process design and techno-economic analysis of a pilot bio-jet fuel production facility were investigated using Aspen plus software and net present value method (NPV). This process include two-step hydrothermal decomposition of corncob to furfural (steam stripping of hemicellulose) and Levulinic acid (LA, acidic hydrolysis of cellulose), oxygenated precursor production via aldol condensation reaction of furfural and LA, and the subsequent hydro-processing for oxygen removal. Lab experiments on the major area of the process were carried out. The yields of furfural, LA, oxygenated precursor and bio-jet fuel-range hydrocarbons (C8–C15) were 59.5% (based on hemicellulose), 34.4% (based on cellulose), 75% (based on furfural and LA input) and 51wt% (based on precursor) respectively. These values were used as the input information for the process simulation of a first-of-a-kind pilot facility for 1.3ML/a bio-jet fuel production using this pioneering technology.The mass and energy analysis from Aspen plus model shows that the bio-jet fuel yield was 0.125tonne/tonne dried corncob. 31.0% of carbon atoms and 47.6% of potential energy from carbohydrate compounds of corncob leave as bio-jet fuel. The estimated consumption of water, steam and electricity is relatively high of 12.3kg, 63.7kg and 1.22KWh respectively due to small simulation scale and lack of process optimization. The total capital cost was ca. $3.96MM for the 1.3ML/a facility, of which 28% of equipment investment is spent for oxygenated precursor production. The total operation expense (OPEX) is $1.18/L bio-jet fuel, including variable and fixed costs. Expenses on corncob, catalytic catalyst and H2contribute 23%, 19% and 16% respectively. Single point sensitivity analysis of the major breakdown of OPEX shows that catalyst lifetime is the priority factor. Economy of scale of minimum selling price of bio-jet fuel (MSPB) for different capacity facilities (1.3ML/a, 6.5ML/a and 13ML/a) was investigated using different discount and tax rates, of which the lowest MSPB was $0.74/L with a subsidy of $0.31/L at 10% discount rate.
机译:使用Aspen plus软件和净现值方法(NPV)研究了生物喷气燃料生产试验设施的工艺设计和技术经济分析。该过程包括玉米芯两步水热分解为糠醛(半纤维素的汽提)和左旋丙酸(LA,纤维素的酸性水解),通过糠醛和LA的醛醇缩合反应生成氧化的前体,随后进行加氢制氧去除。在该过程的主要领域进行了实验室实验。糠醛,洛杉矶,氧化前体和生物喷气燃料范围碳氢化合物(C8–C15)的产率为59.5%(基于半纤维素),34.4%(基于纤维素),75%(基于糠醛和LA输入)和分别为51wt%(基于前体)。这些值被用作使用这种开创性技术进行1.3ML / a生物喷气燃料生产的首批试验设施的过程仿真的输入信息.Aspen plus模型的质量和能量分析表明生物喷气燃料的产量为0.125吨/吨干玉米芯。来自玉米芯的碳水化合物化合物的31.0%的碳原子和47.6%的势能作为生物喷气燃料离开。由于模拟规模小和缺乏工艺优化,估计的水,蒸汽和电耗分别相对较高,分别为12.3kg,63.7kg和1.22KWh。总投资成本约为1.3毫升/年设施的成本为3.96美元,其中设备投资的28%用于生产氧化前体。总操作费用(OPEX)为$ 1.18 / L生物喷气燃料,包括可变成本和固定成本。玉米芯,催化催化剂和氢气的费用分别占23%,19%和16%。对OPEX主要故障的单点灵敏度分析表明,催化剂寿命是首要因素。使用不同的折扣和税率研究了不同容量设施(1.3ML / a,6.5ML / a和13ML / a)的生物喷气燃料最低销售价格规模经济,其中最低MSPB为0.74美元。 / L,以10%的贴现率补贴$ 0.31 / L。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号