...
首页> 外文期刊>Applied clay science >Graphite-LDH hybrid supported zirconocene for ethylene polymerization: Influence of the support on the crystallization kinetics and thermal stability of polyethylene
【24h】

Graphite-LDH hybrid supported zirconocene for ethylene polymerization: Influence of the support on the crystallization kinetics and thermal stability of polyethylene

机译:石墨-LDH杂交支持的乙烯聚合锆烯酮:载体对结晶动力学的影响和聚乙烯的热稳定性

获取原文
获取原文并翻译 | 示例
           

摘要

A hybrid nanomaterial, low crystallinity graphite-layered double hydroxide, was used as a support for zirconocene catalyst. The hybrid nanomaterial graphite-NiAl layered double hydroxides (G/LDH) were synthesized by the co-precipitation method. The synthesized nanomaterial was used as a support for zirconocene catalyst. The polymerization reactions were carried out for ethylene polymerization. The synthesized polyethylene (PE) was analyzed by using differential scanning calorimetry (DSC), Crystallization analysis & fractionation (CRYSTAF), and thermogravimetric analysis for its thermal and microstructural characteristics. The crystallization kinetics were studied by the Ozawa and combined Ozawa and Avrami models. It was found that the presence of G/LDH from the catalyst support nucleated the PE crystallization and shifted the crystallization onset temperature to a higher value. However, the overall crystallization rate was slowed by the presence of the nanomaterial due to growth impingement. Moreover, the PE synthesized by G/LDH supported catalyst possessed higher thermal stability than PE synthesized by unsupported zirconocene catalyst. The integral isoconversional method was used to evaluate the activation energy of thermal degradation and crystallization kinetics. The degradation mechanism was validated by the application of the integral master plot technique. The degradation mechanism of neat PE resembled phase boundary controlled mechanism second and third-order, i.e. (R2, R3), while PE synthesized by G/LDH supported catalyst had a shift in degradation mechanism from (R2, R3) to a diffusion-limited mechanism at the later stages of degradation.
机译:杂化纳米材料,低结晶性石墨层层双氢氧化物作为锆偶联催化剂的载体。通过共沉淀法合成杂化纳米材料石墨 - Nial层状双氢氧化物(G / LDH)。合成的纳米材料用作锆偶联催化剂的载体。聚合反应用于乙烯聚合。通过使用差示扫描量热法(DSC),结晶分析和分馏(Crystaf)和热分析来分析合成的聚乙烯(PE),以及其热和微观结构特性的热重分析。通过甲川和欧扎川和AVRAMI模型研究了结晶动力学。结果发现,来自催化剂载体的G / LDH的存在核解PE结晶并将结晶发作温度变化至更高的值。然而,由于纳米材料由于生长撞击,通过纳米材料的存在减慢了总结晶速率。此外,由G / LDH负载催化剂合成的PE具有比由不支持的锆偶联催化剂合成的PE更高的热稳定性。整体异组方法用于评估热劣化和结晶动力学的活化能。通过应用整体母图技术验证了降解机制。纯净PE的降解机制类似相位边界控制机构的第二和三阶,即(R2,R3),而G / LDH负载催化剂合成的PE在来自(R2,R3)的降解机制转变为漫射限制降解后期的机制。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号