Preparation of porous material from talc by mechanochemical treatment and subsequent leaching

摘要

Synthesis of porous silica via mechanochemical treatment of talc and subsequent acid leaching was investigated by X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and N_2 adsorption techniques. Raw talc was ground for different times and then leached with 4 M hydrochloric acid (HCl) at 80 ℃. Grinding for 6 h and subsequent leaching for 2 h of raw talc produced the porous silica with a specific surface area of 133 m~2/g and total pore volume of 0.22 ml/g. The increase in specific surface area (S_(BET)) of the porous silica reflected the formation of micropores of 1.2～1.8 nm and mesopores of 4.0～5.5 nm in diameter inside the porous structure. The number of micropores decreased with prolonged leaching time, which can be attributed to a condensation reaction. The characteristic of hysteresis loop indicated mainly slit-shaped pores. The apparent activation energy for the leaching process was calculated to be about 21.6 kJ/mol, indicating that the kinetic process of talc leaching was the diffusion-controlled reaction. Mechanochemical treatment may promote the amorphization of talc, being greatly favorable to the subsequent leaching.