Preparation and characterization of low-cost ceramic microfiltration membranes for the removal of chromate from aqueous solutions

摘要

Low-cost ceramic microfiltration membranes were prepared using clay of IIT Guwahati. Two membranes were prepared by paste casting followed by sintering at different temperatures, the first one from clay only (membrane A) and the second one from clay with small amounts of sodium carbonate, sodium metasilicate and boric acid (membrane B). Both the membranes were characterized by TGA, SEM, XRD, water permeability test and acid-base treatment. With the increase of sintering temperature, pore size as well as permeability and flexural strength were increasing while porosity and pore density were decreasing. The overall performance of membrane B was better than membrane A. The average pore size, porosity, pore density and flexural strength of membrane B sintered at 1000 ℃ were 4.58 μm, 0.42, 2.06×10~(10) m~(-2) and 11.55 MPa respectively. This membrane was used for the removal of chromate from aqueous solutions by micellar enhanced microfiltration (MEMF) using cetylpyridinium chloride (CPC). 100% rejection of chromate ions were obtained at a feed ratio (CPC/chromate) of 10. Based on raw material prices, the membrane cost was estimated to be $19/m~2. The prepared low-cost membrane showed good promise for the treatment of wastewater containing such heavy metals.