Hydraulic properties of smectite rich clay controlled by hydraulic gradients and filter types

摘要

The common practice in geotechnical laboratories is to Appl.y high hydraulic gradients for getting results in reasonable time but this can jeopardize the accuracy. In this paper, the hydraulic conductivity of a smectite rich day from Iraq was determined under different hydraulic gradients (5 to 10, 000 m/m) using several densities and two permeants. Also, two types of filters were used, ordinary stainless steel sintered filter and sand/silt filter, in order to examine the possible effect of clogging by dragged clay gel particles. It was concluded that the outflow filter can affect the evaluated conductivity especially when Appl.ying high hydraulic gradients. For sintered filters the hydraulic conductivity was reduced as the gradient increased, while the conductivity increased as the hydraulic gradient increased when using sand/silt filters. For salt water the impact of the gradient was less obvious than for distilled water. A theoretical model was derived for selecting safe hydraulic gradients as a function of dry density, swelling pressure and permeant type. A major conclusion was that the gradient in laboratory testing should not exceed 100 m/m.