...
首页> 外文期刊>IEEE Antennas and Wireless Propagation Letters >A Circularly Polarized SIW Slot Antenna Based on High-Order Dual-Mode Cavity
【24h】

A Circularly Polarized SIW Slot Antenna Based on High-Order Dual-Mode Cavity

机译:基于高阶双模腔的圆偏振SIW槽天线

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

In this letter, a novel circularly polarized (CP) slotted substrate integrated waveguide (SIW) cavity antenna using a hybrid TE202 mode (HTM) and the eigen TE202 mode (ETM) is proposed and studied. The antenna is designed for Ku-band satellite wireless link applications. It utilizes two different and orthogonal TE202 modes (ETM and HTM) with slots etched on the surface to form left-hand CP radiation. It is directly fed by a coaxial probe with a low profile. The working mechanism and the design approach are elaborated. The current distribution for the two TE202 high-order modes is analyzed. Shorting pins and slots are applied to generate the required CP radiation. To verify the feasibility, the antenna is simulated and fabricated using the conventional printed circuit board (PCB) process. It has a measured -10 dB impedance bandwidth of 4.2% and a 3 dB axial ratio (AR) bandwidth of 1.6%. The peak gain is over 7 dBic in the operation band. The antenna has a size of 0.92 lambda(0) x 0.90 lambda(0), where lambda(0) is the free-space wavelength at 12.24 GHz. Good agreement between the simulation and measurement results is observed.
机译:在这封信中,提出并研究了一种新颖的圆极化(CP)开槽基板集成波导(SiW)腔天线和eIGENTe202模式(ETM)。天线专为KU波段卫星无线链路应用而设计。它利用两种不同和正交的TE202模式(ETM和HTM),刻划在表面上蚀刻以形成左手CP辐射。它由具有较低轮廓的同轴探针直接馈送。阐述了工作机制和设计方法。分析了两个TE202高阶模式的电流分布。施加短销和插槽以产生所需的CP辐射。为了验证可行性,使用传统的印刷电路板(PCB)工艺模拟和制造天线。它具有测量的-10 dB阻抗带宽为4.2%,3dB轴向比(AR)带宽为1.6%。峰值增益在操作带中超过7 dBic。天线的尺寸为0.92λ(0)×0.90λ(0),其中Lambda(0)是12.24GHz的自由空间波长。观察模拟和测量结果之间的良好一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号