首页> 外文期刊>IEEE Transactions on Antennas and Propagation >Ultra-Wideband Printed Slot Antenna With Graded Index Superstrate
【24h】

Ultra-Wideband Printed Slot Antenna With Graded Index Superstrate

机译:具有渐变折射率覆层的超宽带印刷槽天线

获取原文
获取原文并翻译 | 示例
           

摘要

An ultra-wideband (UWB) compact slot antenna with a directional radiation pattern is presented in this communication. The concept is based on dielectric loaded multi-element slot antennas. Wide bandwidth operation is achieved using a driven wide slot antenna fed via an off-centered microstrip line capable of creating a fictitious short along the slot and a number of parasitic antenna elements. The proposed slot antenna uses a graded index superstrate with tapered dielectric constants, from high index to low index , in order to further improve the bandwidth and achieve directional radiation pattern. The superstrate dimensions are carefully chosen so that a dielectric resonator mode is excited to provide radiation at the lowest frequency. A sensitivity study is carried out to optimize the geometric parameters of the slot antennas and the graded index superstrate in order to achieve the maximum bandwidth as well as an unidirectional and frequency invariant radiation pattern. Through this optimization, a compact antenna is designed, fabricated, and tested to show a VSWR value of lower than 2.5 across a 2.9:1 frequency range whose dimensions are $0.27 lambda times 0.2 lambda times 0.068 lambda$ at the lowest frequency of operation.
机译:在此通信中介绍了具有定向辐射方向图的超宽带(UWB)紧凑型缝隙天线。该概念基于电介质加载的多元件缝隙天线。使用驱动的宽缝天线来实现宽带宽操作,该驱动的宽缝天线通过偏心微带线馈电,该微带线能够沿缝隙产生假想的短路以及许多寄生天线元件。所提出的缝隙天线使用具有从高折射率到低折射率的渐缩介电常数的渐变折射率上覆层,以进一步改善带宽并实现定向辐射方向图。仔细选择上层板的尺寸,以便激发介电共振器模式以提供最低频率的辐射。进行了敏感性研究,以优化缝隙天线的几何参数和渐变折射率覆盖物,以实现最大带宽以及单向和频率不变的辐射方向图。通过这种优化,设计,制造和测试了紧凑型天线,以显示在2.9:1频率范围内VSWR值低于2.5的情况,其尺寸为 $ 0.27在最低操作频率下,λ乘以0.2乘以0.068乘以0.0。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号