...
首页> 外文期刊>IEEE Transactions on Antennas and Propagation >Uniplanar High-Gain 2-D Scanning Leaky-Wave Multibeam Array Antenna at Fixed Frequency
【24h】

Uniplanar High-Gain 2-D Scanning Leaky-Wave Multibeam Array Antenna at Fixed Frequency

机译:UNIPLANAR高增益2-D扫描固定频率的漏洞波多阵列阵列天线

获取原文
获取原文并翻译 | 示例

摘要

A new topology for 2-D scanning multibeam array antenna (MAA) design is proposed. Different from the traditional 2-D scanning scheme, this new design approach is composed of a 1-D beam-forming network (BFN) and a set of 1-D pattern-reconfigurable antennas, which can together realize 2-D multibeam scanning. Compared with traditional schemes, the proposed topology has advantages of uniplanar configuration and better flexibility in scaling up the array. To demonstrate the validity of the proposed topology, a high-gain 2-D scanning leaky-wave MAA operating at 10 GHz is designed. A horn BFN and a fixed-frequency leaky-wave antenna (LWA) are designed as the feeding part and radiation part, respectively. A number of new techniques are also developed for the design. For the horn BFN, a new phase-compensation method to reduce the gain drop is presented and phase inverters are introduced to provide an extra 180 degrees of phase shift. Meanwhile, some modification of the LWA is conducted for better compatibility between the horn BFN and the LWA. A substrate integrated waveguide (SIW) to half-mode SIW (HMSIW) transition is introduced between the horn BFN and the LWA. The LWAs are terminally shorted to avoid the usage of matched loads. The width of the LWA is investigated to achieve suitable beam coverage and S-parameters. Finally, the antenna is fabricated and experiments are conducted to verify the agreement between simulation and measurement.
机译:提出了一种新的2-D扫描MultiBeam阵列天线(MAA)设计的新拓扑结构。与传统的二维扫描方案不同,这种新的设计方法由1-D光束形成网络(BFN)和一组1-D模式可重新配置天线组成,可以一起实现2-D多芯扫描。与传统方案相比,所提出的拓扑具有uniplanar配置的优势,在缩放阵列方面的灵活性更好。为了证明所提出的拓扑的有效性,设计了在10 GHz的高增益2-D扫描泄漏波MAA。喇叭BFN和固定频率漏光天线(LWA)分别设计为进料部分和辐射部分。还为设计开发了许多新技术。对于喇叭BFN,提出了一种降低增益降低的新的相位补偿方法,并引入相位逆变器以提供额外的180度的相移。同时,对LWA进行了一些修改,以便在喇叭BFN和LWA之间更好地相容。在喇叭BFN和LWA之间引入基板集成波导(SIW)到半模式SIW(HMSIW)转变。 LWAS是终端短路,以避免使用匹配的负载。研究了LWA的宽度以实现合适的光束覆盖和S参数。最后,制造天线并进行实验以验证模拟和测量之间的协议。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号