首页> 外文期刊>IEEE Transactions on Antennas and Propagation >Dual-Polarized Phased Array With End-Fire Radiation for 5G Handset Applications
【24h】

Dual-Polarized Phased Array With End-Fire Radiation for 5G Handset Applications

机译:双极化相控阵,具有5G手机应用的端射辐射

获取原文
获取原文并翻译 | 示例
           

摘要

This communication proposes a dual-polarized end-fire phased array for 5G handset devices at 28 GHz. The proposed four-element array has low profile of 1.1 mm, small clearance of 2.7 mm, and symmetric patterns in the vertical plane. The array element is fed by substrate-integrated waveguide (SIW), which works as a waveguide (WG) antenna with vertically polarized radiation pattern. Two transition plates are introduced to improve the impedance matching of the WG antenna. The horizontal polarization is generated by exciting one of the transition plates as an antenna. The other transition plate is modified as a group of triangle strips to minimize its reflection to the horizontal radiation patterns. A -10 dB frequency bandwidth of 5.3% and a -6 dB bandwidth of 25% are achieved, overlapping between the vertical and horizontal polarization. The array scanning angle is from -54 degrees to 44 degrees at 29 GHz for both polarization. Within the scanning range, the end-fire gain varies from 7.48 to 8.14 dBi for the horizontal polarization, whereas from 4.49 to 8.05 dBi for the vertical polarization. Good agreements between simulations and measurements are well achieved and shown in this communication.
机译:该通信提出了28 GHz的5G手机设备的双极化端射阵列。所提出的四元件阵列具有低轮廓为1.1mm,小间隙为2.7mm,垂直平面中的对称图案。阵列元件由基板 - 集成波导(SIW)馈送,其用作具有垂直偏振辐射图案的波导(WG)天线。引入两个过渡板以改善WG天线的阻抗匹配。通过将过渡板中的一个作为天线促进一个过滤板来产生水平极化。另一个过渡板被修改为一组三角条,以最小化其对水平辐射图案的反射。实现了-10 dB频率带宽为5.3%和-6 dB带宽为25%,在垂直和水平极化之间重叠。阵列扫描角度在29GHz的情况下为-54度至44度,用于两极化。在扫描范围内,最终火灾增益可从7.48到8.14 dBI变化水平极化,而垂直极化的4.49至8.05 dBi。模拟和测量之间的良好协议很好地实现并在此通信中显示。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号