Calculation Of The Power Peaking Factor In A Nuclear Reactor Using Support Vector Regression Models

摘要

Local power density (LPD) at the hottest part of a hot nuclear fuel rod should be estimated accurately to confirm that the rod does not melt. The power peaking factor (PPF) is defined as the highest LPD divided by the average power density in the reactor core. In this paper, the PPF is calculated by support vector regression (SVR) models using numerous measured signals from the reactor cooling system. SVR models are regression analysis models using a kernel function for artificial neural networks. Their neural network weights are found by solving a quadratic programming problem under linear constraints. SVR models are trained using a training data set and then verified against another test data set. The proposed SVR models were applied to the first fuel cycle of the Yonggwang nuclear power plant unit 3. The root mean square errors of the SVR model, with and without in-core neutron flux sensor signal inputs, were 0.1113% and 0.0968%, respectively. This level of errors is sufficiently low for use in LPD monitoring.