首页> 外文期刊>Annals of nuclear energy >Study on the transient evolution law of internal flow field and dynamic stress of reactor coolant pump under rotor seizure accident
【24h】

Study on the transient evolution law of internal flow field and dynamic stress of reactor coolant pump under rotor seizure accident

机译:转子卡死事故反应堆冷却剂泵内流场瞬态演化规律及动应力研究

获取原文
获取原文并翻译 | 示例
       

摘要

When the reactor coolant pump (RCP) operates under rated conditions, the rotor is suddenly forced to stop rotating in a very short time because of the great resistance moment. This nuclear accident is called rotor seizure accident and is the most extreme nuclear accident in a nuclear power plant. After the rotor seizure accident, the coolant flow rate of the primary circuit system drops sharply, the core temperature rises, and the fuel rod is forced in a danger of deviating from the bubble core boiling (DNB). In this paper, the AP1000 reactor coolant pump is taken as the research object, and the transient transition process under the rotor seizure condition are studied. Firstly, the simulation calculation of bidirectional fluid structure coupling was verified by experiments. Then on the basis of considering the bidirectional fluid-solid coupling, the numerical simulation method is applied to study the flow law inside the reactor coolant pump and the deformation and stress distribution of the blade under the rotor seizure condition. The results show: the rotor seizure accident condition is a transient transition from a normal pump condition to a reverse turbine condition; when the rotor seizure accident occurs, the high specific pressure energy zone in the pump is gradually transferred from the volute to the inlet section; due to the direct impact of the liquid flow, the impeller is a concentrated area of high stress; high pivot dynamic stress was generated easily at the juncture between the inlet and outlet edges and the front and back cover plates of the impeller, which would transfer with the evolution of the rotor seizure accident. (C) 2019 Elsevier Ltd. All rights reserved.
机译:当反应堆冷却剂泵(RCP)在额定条件下运行时,由于阻力很大,转子会在很短的时间内突然被迫停止旋转。这种核事故称为转子咬死事故,是核电厂中最极端的核事故。在发生转子卡死事故后,一次回路系统的冷却剂流量急剧下降,堆芯温度升高,燃料棒被迫脱离气泡堆芯沸腾(DNB)的危险。本文以AP1000反应堆冷却剂泵为研究对象,研究了转子卡住条件下的过渡过程。首先,通过实验验证了双向流体结构耦合的仿真计算。然后,在考虑双向流固耦合的基础上,采用数值模拟的方法研究了反应堆冷却剂泵内部的流动规律以及在转子卡住状态下叶片的变形和应力分布。结果表明:转子卡死事故状态是从正常泵工状态到涡轮反向工况的过渡。当发生转子卡死事故时,泵中的高比压能区逐渐从蜗壳转移到入口部分。由于液流的直接冲击,叶轮是高应力的集中区域。叶轮的入口和出口边缘与前,后盖板之间的接合处容易产生高的枢轴动应力,该动应力会随着转子卡死事故的发展而转移。 (C)2019 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号