首页> 外文期刊>Annals of nuclear energy >Development of a method for identifying severe status requiring early entrance of SAMG considering human action time
【24h】

Development of a method for identifying severe status requiring early entrance of SAMG considering human action time

机译:开发一种识别严重状态的方法,该方法需要考虑到人类动作时间,要求SAMG尽早进入

获取原文
获取原文并翻译 | 示例
           

摘要

The margin of human action time from severe accident management guideline (SAMG) entrance to reactor vessel (RV) failure was analyzed to compare the required human action time and available human action time based on a severe accident DB developed using MAAP 5.02 code. In order to analyze the margin of human action time, dominant initiating accidents are selected, such as small break loss of coolant accident (SBLOCA), medium break (MBLOCA), large break (LBLOCA), and station blackout (SBO) which account for about 80 percent of core damage frequency (CDF), and the worst scenario was selected in each initiating accident. In the analysis of the worst scenarios, it was confirmed that a human might be fail to prevent RV failure due to insufficient action time. Therefore, in this study, a method that can determine the SAMG entry condition in advance was developed by applying the concept of component state to function recovery procedure (FRP). To verify the developed method, a case study was performed based on the scenarios that feed & bleed (F&B) and aggressive cool down (ACD) operations are not successful within limited time after entering the FRP. As a result, the developed strategy flow chart can identify the SAMG entry condition in advance, and provide a human with sufficient action time to mitigate severe accidents. It is expected that the results of this paper can provide some insights for revising the SAMG, or for developing an integrated accident management procedures (IAMPs).
机译:基于使用MAAP 5.02代码开发的严重事故数据库,分析了从严重事故管理指南(SAMG)入口到反应堆容器(RV)故障的人员行动时间裕度,以比较所需的人员行动时间和可用的人员行动时间。为了分析人类行动时间的余量,选择了占主导地位的起始事故,例如,冷却剂事故的小中断损失(SBLOCA),中中断(MBLOCA),大中断(LBLOCA)和停电(SBO)大约80%的核心损坏频率(CDF),并且在每次启动事故中都选择了最坏的情况。在最坏情况的分析中,已确认由于动作时间不足,可能无法防止RV失败。因此,在这项研究中,通过将组件状态的概念应用于功能恢复程序(FRP),开发了一种可以预先确定SAMG进入条件的方法。为了验证所开发的方法,案例研究基于以下场景:进料(F&B)和主动冷却(ACD)操作在进入FRP后的有限时间内均未成功。结果,所开发的策略流程图可以提前识别SAMG进入条件,并为人员提供足够的行动时间以减轻严重事故的发生。期望本文的结果可以为修订SAMG或开发综合事故管理程序(IAMP)提供一些见识。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号