首页> 外文期刊>AIAA Journal >Flowfield Establishment in Hypervelocity Shock-Wave/Boundary-Layer Interactions
【24h】

Flowfield Establishment in Hypervelocity Shock-Wave/Boundary-Layer Interactions

机译:超高速冲击波/边界层相互作用中的流场建立

获取原文
获取原文并翻译 | 示例
           

摘要

Shock/boundary-layer interactions generated over double-wedge and double-cone models in high-enthalpy, hypersonic flows are known to be sensitive to the thermochemical state of the gas. In this study, the transient evolution of shock interactions and separated flow is examined in nitrogen and air freestream conditions with stagnation enthalpies ranging from 2 to 8 MJ/kg and Mach numbers from 4 to 7. The time-dependent flowfield and associated time scales required to reach mean values for both viscous and inviscid processes are investigated using fast-response thermocouples and high-speed schlieren and chemiluminescence imaging. In all cases, the oblique/bow-shock triple point is observed to propagate upstream to a mean location as the bow-shock standoff distance increases with time. For all freestream conditions, the triple point reaches a mean position in less time for the conical than the wedge flow. Distinct differences between nitrogen and air both in the evolution and mean flow features are observed in the highest-enthalpy test case. The triple-point establishment time is greater in nitrogen than air, corresponding to an increased bow-shock standoff distance, whereas the viscous establishment times in the region of peak heating are comparable. Although the observed dependence on freestream composition and enthalpy can be used to quantify the effect of thermochemistry, we note the time scales for viscous and in viscid processes are of the same order of magnitude for all conditions studied. Normalized establishment times of 2-8 are measured, in reasonable agreement with existing experimental data from surface gauges (6-11).
机译:众所周知,在高焓高超声速流中,通过双楔和双锥模型产生的激波/边界层相互作用对气体的热化学状态敏感。在这项研究中,研究了在氮气和空气自由流动条件下,滞流焓为2到8 MJ / kg,马赫数为4到7的情况下,冲击相互作用和分离流的瞬态演变。需要随时间变化的流场和相关的时标使用快速响应热电偶以及高速schlieren和化学发光成像技术研究了达到粘性和无粘性过程均值的方法。在所有情况下,随着弓形冲击对峙距离随时间增加,观察到倾斜/弓形冲击三点向上游传播到平均位置。对于所有自由流条件,圆锥形的三点到达时间都比楔流的平均时间短。在最高焓的测试案例中,观察到氮气和空气在放气和平均流量方面的明显差异。氮气中的三点建立时间大于空气中的三点建立时间,这对应于增加的弓形冲击距离,而在峰值加热区域中的粘性建立时间却相当。尽管观察到的对自由流成分和焓的依赖性可以用来量化热化学的影响,但我们注意到,在所有研究的条件下,粘性和粘性过程的时间尺度都是相同的数量级。测量的归一化建立时间为2-8,与表面计(6-11)的现有实验数据合理地吻合。

著录项

  • 来源
    《AIAA Journal》 |2015年第2期|311-320|共10页
  • 作者

    A. B. Swantek; J. M. Austin;

  • 作者单位

    University of Illinois at Urbana-Champaign, Champaign, Illinois 61801;

    University of Illinois at Urbana-Champaign, Champaign, Illinois 61801;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号