High accuracy navigation and landing system using GPS/IMU systemintegration

摘要

In this paper, the accuracy, integrity and continuity of function requirements for automatic landing systems using satellite navigation systems are discussed. Such a landing system is the integrated navigation and landing system (INLS) developed by Deutsche Aerospace (DASA/Ulm, Germany). The system concepts of the INLS are presented. It is shown how an INLS, based on system integration of a satellite navigation system (e.g., GPS) in realtime differential mode with an inertial measurement unit (IMU) in the accuracy class of an attitude and heading reference system (AHRS), can meet the requirements: the results given are mainly devoted to the accuracy issues. Using Kalman filter techniques, an in-flight calibration of the IMU is performed. The advantage of system integration, especially in dynamic flight conditions and during phases of flight with satellite masking, is explained. The accuracy, integrity and continuity of function of the INLS were proven by means of flight tests in a commuter aircraft using a laser tracker as a reference. These flight tests have shown that the short-term accuracy (<60 seconds) of the AHRS used within the INLS has been improved from low cost sensor quality to the accuracy of a high quality laser inertial navigation system (LNIS). With the presented INLS, a landing at any airfield, not equipped with conventional Instrument Landing System (ILS) or Microwave Landing System (MLS), is possible by using a very cost effective system. The INLS is a high accuracy navigation and landing system designed to be used instead of conventional landing systems at small airfields and to fill operational gaps of conventional navigation and landing systems in cruise and approach on large airports