...
首页> 外文期刊>IEEE Transactions on Aerospace and Electronic Systems >Quickest detection for sequential decentralized decision systems
【24h】

Quickest detection for sequential decentralized decision systems

机译:顺序分散决策系统的最快检测

获取原文
获取原文并翻译 | 示例

摘要

Quickest detection procedures are techniques used to detect sudden or abrupt changes (also called disorders) in the statistics of a random process. The goal is to determine as soon as possible that the change occurred, while at the same time minimizing the chance of falsely signaling the occurrence of a disorder before the change. In this work the distributed quickest detection problem when the disorder occurs at an unknown time is considered. The distributed local detectors utilize a simple summing device and threshold comparator, with a binary decision at the output. At the fusion center, the optimal maximum likelihood (ML) procedure is analyzed and compared with the more practical Page procedure for quickest detection. It is shown that the two procedures have practically equivalent performance. For the important case of unknown disorder magnitudes, a version of the Hinkley procedure is also examined. Next, a simple method for choosing the thresholds of the local detectors based on an asymptotic performance measure is presented. The problem of selecting the local thresholds usually requires optimizing a constrained set of nonlinear equations; our method admits a separable problem, leading to straightforward calculations. A sensitivity analysis reveals that the resulting threshold settings are optimal for practical purposes. The issue of which sample size to use for the local detectors is investigated, and the tradeoff between decision delay and communication cost is evaluated. For strong signals, it is shown that the relative performance deteriorates as the sample size increases, that is, as the system cost decreases. Surprisingly, for the weak signal case, lowering the system cost (increasing the sample size) does not necessarily result in a degradation of performance
机译:最快的检测过程是用于检测随机过程统计信息中突然或突然变化(也称为异常)的技术。目的是尽早确定变更的发生,同时最大程度地减少在变更之前错误地发出疾病发生信号的机会。在这项工作中,考虑了在未知时间发生疾病时分布最快的检测问题。分布式本地检测器利用简单的求和设备和阈值比较器,在输出处具有二进制判定。在融合中心,分析了最佳最大似然(ML)程序,并将其与更实用的Page程序进行比较,以实现最快的检测。结果表明,这两个过程实际上具有相同的性能。对于未知的疾病幅度的重要案例,还检查了Hinkley程序的版本。接下来,提出了一种基于渐近性能测度来选择本地检测器阈值的简单方法。选择局部阈值的问题通常需要优化一组受约束的非线性方程。我们的方法承认一个可分离的问题,从而导致了简单的计算。灵敏度分析显示,所得阈值设置对于实际用途是最佳的。研究了用于本地检测器的样本大小的问题,并评估了决策延迟和通信成本之间的权衡。对于强信号,表明相对性能随样本大小的增加(即系统成本的降低)而降低。令人惊讶的是,对于信号较弱的情况,降低系统成本(增加样本量)并不一定会导致性能下降

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号