首页> 外文期刊>Advances in space research >GGSP: Realisation and maintenance of the Galileo Terrestrial Reference Frame
【24h】

GGSP: Realisation and maintenance of the Galileo Terrestrial Reference Frame

机译:GGSP:伽利略地球参考框架的实现和维护

获取原文
获取原文并翻译 | 示例
           

摘要

The realisation and maintenance of a Galileo Terrestrial Reference Frame (GTRF) is the main function of the Galileo Geodetic Service Provider (GGSP). The GTRF shall be compatible with the latest International Terrestrial Reference Frame (ITRF) within a precision level of 3 cm (2 sigma). The connection to the ITRF is realized and validated by stations of the International GNSS Service (IGS) and by geodetic local ties to stations equipped with other geodetic techniques. It is demonstrated that this GTRF can be maintained by including the Galileo Signal-in-Space data, once Galileo reaches its operational stage. The GGSP will also provide additional products, such as Earth Rotation Parameters, satellites orbits, clock corrections for satellites and stations, which will be offered to the Galileo user community to have most precise access to the GTRF and will be used to monitor the accuracy of the corresponding Galileo Mission Segment. The GGSP was built up in time, and for a final demonstration the full system was operated for an interval of 6 months. During that time also microwave data from the two active GIOVE satellites were used. The GGSP Consortium followed the most up to date IGS standards of weekly processing during seven monthly campaigns (November 2006 to June 2008) and a continuous processing from September 2008 to February 2009 delivering several versions of the GTRF. The latest GTRF solution (GTRF09v01) has an RMS position difference with respect to the ITRF2005 computed over the 71 common stations of 1.1 and 2.9 mm in the horizontal and vertical components, respectively. The RMS velocity differences are 0.3 and 0.6 mm/y, respectively. The GGSP GPS satellite orbits and clock corrections agree with the IGS Final products at a level of 5-11 mm and 0.02-0.03 ns, respectively. The quality of the GIOVE orbits is at a level of 20-30 cm. The Hydrogen-Maser on board of GIOVE-B is nearly one order of magnitude better than the GPS satellite clocks.
机译:Galileo地球参考框架(GTRF)的实现和维护是Galileo大地测量服务提供商(GGSP)的主要功能。 GTRF必须与最新的国际地面参考框架(ITRF)兼容,精度水平为3 cm(2 sigma)。与ITRF的连接是通过国际GNSS服务(IGS)的站点以及与配备了其他大地测量技术的站点的大地局部联系来实现和验证的。事实证明,一旦伽利略到达其运行阶段,就可以通过包含伽利略空间信号数据来维护此GTRF。 GGSP还将提供其他产品,例如地球自转参数,卫星轨道,卫星和台站的时钟校正,这些产品将提供给Galileo用户社区,以最精确地访问GTRF,并将用于监视GPS的准确性。相应的伽利略任务部分。 GGSP及时建立,为进行最终演示,整个系统运行了6个月。在此期间,还使用了两个活跃的GIOVE卫星的微波数据。 GGSP联盟在七个月的宣传活动(2006年11月至2008年6月)中遵循了最新的IGS每周处理标准,并于2008年9月至2009年2月进行了连续处理,提供了多个版本的GTRF。最新的GTRF解决方案(GTRF09v01)相对于ITRF2005的RMS位置差是在水平分量和垂直分量的71个公共站点(分别为1.1和2.9 mm)上计算得出的。 RMS速度差分别为0.3和0.6 mm / y。 GGSP GPS卫星轨道和时钟校正分别与IGS最终产品一致,分别为5-11毫米和0.02-0.03 ns。 GIOVE轨道的质量为20-30厘米。 GIOVE-B机载的氢激子比GPS卫星时钟高出近一个数量级。

著录项

  • 来源
    《Advances in space research》 |2011年第2期|p.174-185|共12页
  • 作者单位

    Helmholtz-Zentrum Potsdam, Deutsches GeoForschungsZentrum, Telegrafenberg, D-14473 Potsdam, Germany;

    Institut Geographique National, 6 and 8 Avenue Blaise Pascal, F-77455 Champs-sur-Marne, France;

    Astronomisches Institut der Universitdt Bern, Sidlerstrasse 5, CH-3012 Bern, Switzerland;

    Bundesamt fur Kartographie und Geoddsie, Richard Strauss-Allee 11, D-60598 Frankfurt am Main, Germany;

    European Space Operations Centre, Robert-Bosch-Str. 5, D-64293 Darmstadt, Germany;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    GNSS; galileo; terrestrial reference frame; gtrf; earth rotation parameter;

    机译:GNSS;伽利略地面参考系gtrf;地球自转参数;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号