首页> 外文期刊>ACI Structural Journal >Shear Strength of RC Jacketed Interior Beam-Column Joints without Horizontal Shear Reinforcement
【24h】

Shear Strength of RC Jacketed Interior Beam-Column Joints without Horizontal Shear Reinforcement

机译:无水平剪力的钢筋混凝土护套内梁柱节点的抗剪强度

获取原文
获取原文并翻译 | 示例
           

摘要

The interior joint shear strength of nonductile frames strengthened with reinforced concrete (RC) jackets, but with no new joint shear hoops and no dowel anchors installed into the new and old concrete interface, was investigated experimentally. Seven oneway interior beam-column joint subassemblages were tested under quasistatic cyclic loading to observe the joint shear strength and overall frame performance. The test measurements are also used to verify two of the analytical models used for predicting the horizontal shear strength of jacketed joints without horizontal joint shear reinforcement. The results show that the RC jacketed scheme is able to efficiently rehabilitate nonductile frames with very poor joint details. An empirical equation for calculating the joint shear strength of RC jacketed frames is proposed in this study.
机译:实验研究了用钢筋混凝土(RC)护套增强的非延性框架的内部接头抗剪强度,但没有在新旧混凝土界面中安装新的接头抗剪箍,也没有安装销钉。在准静态循环载荷下测试了七个单向内梁-柱节点组合,以观察节点的抗剪强度和整体框架性能。测试测量值还用于验证用于预测无水平接头抗剪钢筋的夹套接头水平抗剪强度的两个分析模型。结果表明,RC护套方案能够有效地修复具有非常差的关节细节的非延展性框架。提出了计算RC夹套框架联合抗剪强度的经验公式。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号