首页> 美国卫生研究院文献>Wiley-Blackwell Online Open >Evaluation of patient DVH‐based QA metrics for prostate VMAT: correlation between accuracy of estimated 3D patient dose and magnitude of MLC misalignment
【2h】

Evaluation of patient DVH‐based QA metrics for prostate VMAT: correlation between accuracy of estimated 3D patient dose and magnitude of MLC misalignment

机译:评估基于DVH的患者前列腺VMAT的QA指标:估计的3D患者剂量的准确性与MLC错位幅度之间的相关性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The purpose of this study was to evaluate the accuracy of commercially available software, using patient DVH‐based QA metrics, by investigating the correlation between estimated 3D patient dose and magnitude of MLC misalignments. We tested 3DVH software with an ArcCHECK. Two different calculating modes of ArcCHECK Planned Dose Perturbation (ACPDP) were used: “Normal Sensitivity” and “High Sensitivity”. Ten prostate cancer patients treated with hypofractionated VMAT (67.6 Gy/26 Fr) in our hospital were studied. For the baseline plan, we induced MLC errors (0.75,0.5,0.25,0.25,0.5, and 0.75 mm for each single bank). We calculated the dose differences between the ACPDP dose with error and TPS dose with error using gamma passing rates and using DVH‐based QA metrics. The correlations between dose estimation error and MLC position error varied with each structure and metric. A comparison using 1%/1mm gamma index showed that the larger was the MLC error‐induced, the worse were the gamma passing rates. Slopes of linear fit to dose estimation error versus MLC position error for mean dose and D95 to the PTV were 1.76 and 1.40%mm1, respectively, for “Normal Sensitivity”, and −0.53 and 0.88%mm1, respectively, for “High Sensitivity”, showing better accuracy for “High Sensitivity” than “Normal Sensitivity”. On the other hand, the slopes for mean dose to the rectum and bladder, V35 to the rectum and bladder and V55 to the rectum and bladder, were 1.00,0.55,2.56,1.25,3.53, and 1.85%mm1, respectively, for “Normal Sensitivity”, and 2.89,2.39,4.54,3.12,6.24, and 4.11%mm1, respectively, for “High Sensitivity”, showing significant better accuracy for “Normal Sensitivity” than “High Sensitivity”. Our results showed that 3DVH had some residual error for both sensitivities. Furthermore, we found that “Normal Sensitivity” might have better accuracy for the DVH metric for the PTV and that “High Sensitivity” might have better accuracy for DVH metrics for the rectum and bladder. We must be willing to tolerate this residual error in clinical care.PACS number: 87.55Qr
机译:这项研究的目的是通过调查估计的3D患者剂量与MLC错位幅度之间的相关性,使用基于DVH的患者QA指标来评估商用软件的准确性。我们使用ArcCHECK测试了3DVH软件。使用了两种不同的ArcCHECK计划剂量扰动(ACPDP)计算模式:“正常灵敏度”和“高灵敏度”。在我院对十例使用超低级VMAT(67.6 Gy / 26 Fr)治疗的前列腺癌患者进行了研究。对于基准计划,我们引起了MLC错误( 0.75 - 0.5 - 0.25 0.25 0.5 和每个堤岸0.75毫米)。我们使用伽玛通过率和基于DVH的QA指标计算了带误差的ACPDP剂量和带误差的TPS剂量之间的剂量差异。剂量估计误差和MLC位置误差之间的相关性随每个结构和度量而变化。使用 1 < mi mathvariant =“ normal”>% / 1 mm 伽玛指数显示MLC错误导致的值越大,伽玛通过率越差。 PTV的平均剂量和D95的线性拟合剂量估计误差与MLC位置误差的线性拟合斜率为1.76, 1.40 mm 1 分别用于“正常灵敏度”,以及-0.53和 0.88 %< / mi> mm - 1 ”,“高灵敏度”的准确度要比“普通灵敏度”的准确度高。另一方面,对直肠和膀胱的平均剂量,对直肠和膀胱的V35和对直肠和膀胱的V55的平均斜率是 - 1.00 - 0.55 - 2.56 - < mn> 1.25 - 3.53 1.85 < / mo> mm 1 分别为“正常灵敏度”和 - 2.89 - 2.39 - < mn> 4.54 - 3.12 - 6.24 < mo>- 4.11 mm - 1 分别表示“正常灵敏度”比“高灵敏度”要好得多。我们的结果表明,3DVH的两种灵敏度都有一些残留误差。此外,我们发现“正常灵敏度”对于PTV的DVH度量可能具有更好的准确性,而“高灵敏度”对于直肠和膀胱的DVH度量可能具有更好的准确性。我们必须愿意忍受这种残留的临床护理错误。PACS编号:87.55Qr

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号