首页> 美国卫生研究院文献>Journal of Clinical Medicine >Accuracy of Customized Prefabricated Screw-Type Immediate Provisional Restorations after Single-Implant Placement
【2h】

Accuracy of Customized Prefabricated Screw-Type Immediate Provisional Restorations after Single-Implant Placement

机译:单一植入物植入后定制的预制螺钉式立即临时修复的准确性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Limited evidence is available comparing the differences between pre-operative and post-operative 3D implant positions from the viewpoint of prosthetics. We aimed to investigate the differences between preplanned positions of virtual provisional restorations and their actual positions following fully guided single-implant placement. Ten maxillary typodonts with missing right central incisors were imaged using cone-beam computed tomography, and digital impressions were obtained using an intraoral scanner. These data were imported into implant-planning software, following which the provisional restorations were designed. After data superimposition, an appropriate implant position was determined, and a computer-assisted implant surgical guide was designed for each typodont. Orders generated from the implant-planning software were imported into relevant computer-aided design software to design the custom abutments. The abutments, provisional restorations, and surgical guides were fabricated, and each restoration was cemented to the corresponding abutments, generating a screw-type immediate provisional restoration. The implants were placed using the surgical guides, and the screw-type provisional restorations were engaged to the implants. The typodonts were then rescanned using the intraoral scanner. The restorations designed at the treatment planning stage were compared with those in the post-operative scan using metrology software. The angular deviation around the central axis of the implant was measured, and the differences in the crown position were converted to root mean square (RMS) values. The post-operative provisional restorations exhibited an absolute angular deviation of 6.94 ± 5.78° and an RMS value of 85.8 ± 20.2 µm when compared with their positions in the pre-operative stage. Within the limitations of the present in vitro study, the results highlight the potential application of customized prefabricated immediate provisional restorations after single-implant placement.
机译:从假肢的角度比较术前和术后3D植入物位置之间的差异的有限证据。我们旨在调查在完全引导的单种植体植入后虚拟临时修复体的预定位置与实际位置之间的差异。使用锥束计算机断层扫描对十个缺失右中门齿的上颌错牙进行成像,并使用口腔内扫描仪获得数字化印模。这些数据被导入到种植体计划软件中,然后设计临时修复体。数据叠加后,确定合适的植入物位置,并为每个台词设计计算机辅助的植入物手术指南。从种植体计划软件生成的订单被导入到相关的计算机辅助设计软件中,以设计定制基台。制作了基台,临时修复体和手术导向器,并将每个修复体固定在相应的基台上,从而产生了螺钉型的即时临时修复体。使用外科手术引导器放置植入物,然后将螺钉型临时修复体固定到植入物上。然后使用口腔内扫描仪重新扫描伤寒体。使用计量软件将在治疗计划阶段设计的修复体与术后扫描中的修复体进行了比较。测量围绕植入物中心轴的角度偏差,并将牙冠位置的差异转换为均方根(RMS)值。与术前位置相比,术后临时修复体的绝对角度偏差为6.94±5.78°,RMS值为85.8±20.2 µm。在目前的体外研究的局限性内,结果突出了单种植体植入后定制的预制即时临时修复体的潜在应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号