首页> 美国卫生研究院文献>Journal of Clinical Medicine >Analysis of The Reproducibility of Subgingival Vertical Margins Using Intraoral Optical Scanning (IOS): A Randomized Controlled Pilot Trial
【2h】

Analysis of The Reproducibility of Subgingival Vertical Margins Using Intraoral Optical Scanning (IOS): A Randomized Controlled Pilot Trial

机译:使用内光扫扫描(iOS)分析龈下垂直边缘的再现性:随机控制的试验试验

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Background: The aim of this randomized controlled trial was to evaluate the capability of an IOS (Intra Oral Scanner) device, used in standardized conditions, to detect margins of abutments prepared with knife-edge finishing line located at three different levels in relation to the gingival sulcus. Methods: sixty abutment teeth for treatment with full crowns were selected and randomly divided in three groups accordingly to the depth of the finishing line: Group A: supragingival margin; Group B: 0.5–1.0 mm into the sulcus; Group C: 1.5–2.0 mm into the sulcus. Temporary crowns were placed for two weeks and then digital impressions (Aadva IOS 100, GC, Japan) were made of each abutment. As controls, analog impressions were taken, poured, and scanned using a laboratory scanner (Aadva lab scanner, GC, Japan). Two standard tessellation language (STL) files were generated for each abutment, subsequently processed, and superimposed by Exocad software (Exocad GmbH, Darmstadt, Germany), applying the “best-fit“ algorithm in order to align the scan of the conventional with the digital impressions. The distances between each preparation margin and the adjacent gingival tissue were measured. Four measures were taken, two interproximally and buccally, for a total of six measures of each abutment considering three modes of impressions. The data were statistically evaluated using two-way analysis of variance (ANOVA) for each site and the Bonferroni test. Results: there was no difference between the two kinds of impression in Group A in both sites, in Group B a difference of 0.483 mm and 0.682 mm at interproximal and buccal sites, respectively, and in Group C 0.750 mm and 0.964 mm at interproximal and buccal sites, respectively. The analysis performed on a site level (mesial/distal/vestibular) for the depth of both vertical preparations revealed significant differences (p < 0.0001). After a post hoc analysis (Bonferroni), vestibular sites of the shallow vertical preparations resulted in significantly lower values compared to the other sites prepared deeply. Conclusions: the results showed that the location of the margin is an important factor in making a precise and complete impression when IOS (Intra Oral Scanner) is used. Moreover, deep preparation into the sulcus is not recommended for IOS (Intra Oral Scanner) impressions.
机译:背景:该随机对照试验的目的是评估在标准化条件下使用的iOS(内部口腔扫描仪)装置的能力,以检测用刀刃整理线制备的基台边缘,所述刀刃精加工线在三个不同的水平上与其相关的牙龈牙龈。方法:用全冠治疗60个邻接牙齿,并相应地将三组随机分成整理线:A组:Suprictival余量; B组:0.5-1.0 mm进入沟槽; C组:1.5-2.0 mm进入沟槽。临时冠被安置两周,然后是每台基台制成的数字印象(Aadva iOS 100,GC,日本)。作为对照,使用实验室扫描仪进行模拟印象,倒入和扫描(Aadva Lab Scanner,GC,Japan)。为每台基台,随后处理,并由Exocad软件(Exocad GmbH,Darmstadt,Germany)叠加,叠加两个标准曲面图语言(STL)文件,应用“最适合”算法,以便对准传统的扫描数字印象。测量每个制备余量和相邻牙龈组织之间的距离。考虑到三种印象方式,共有四项措施,两项次际和蜂鸣,共有六项措施每种抵御。使用对每个站点的双向分析(ANOVA)的双向分析和Bonferroni测试进行统计评估数据。结果:两种部位中A组A中的两种印象之间没有差异,在B组中分别在氧毒性和颊位点的差异为0.483mm和0.682mm,在奥斯诺省和0.750 mm和0.964mm组中。颊位点分别。对两个垂直制剂深度的部位水平(暗/远端/前庭)进行的分析显示出显着差异(P <0.0001)。在HOC分析(Bonferroni)后,与深深制备的其他网站相比,浅垂直制剂的前庭位点导致显着较低的值。结论:结果表明,当使用iOS(口腔口腔扫描仪)时,保证金的位置是在使用iOS(口腔口腔扫描仪中)的精确和完全印象的重要因素。此外,不推荐在IOS(口腔口腔扫描仪)印模中建议深入制备沟槽。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号