首页> 美国卫生研究院文献>Diagnostics >MDCT-Based Finite Element Analyses: Are Measurements at the Lumbar Spine Associated with the Biomechanical Strength of Functional Spinal Units of Incidental Osteoporotic Fractures along the Thoracolumbar Spine?
【2h】

MDCT-Based Finite Element Analyses: Are Measurements at the Lumbar Spine Associated with the Biomechanical Strength of Functional Spinal Units of Incidental Osteoporotic Fractures along the Thoracolumbar Spine?

机译:基于MDCT的有限元分析:腰椎的测量结果与胸胚脊柱偶然骨折骨折的功能性脊柱骨折的生物力学强度相关吗?

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Assessment of osteoporosis-associated fracture risk during clinical routine is based on the evaluation of clinical risk factors and T-scores, as derived from measurements of areal bone mineral density (aBMD). However, these parameters are limited in their ability to identify patients at high fracture risk. Finite element models (FEMs) have shown to improve bone strength prediction beyond aBMD. This study aims to investigate whether FEM measurements at the lumbar spine can predict the biomechanical strength of functional spinal units (FSUs) with incidental osteoporotic vertebral fractures (VFs) along the thoracolumbar spine. Multi-detector computed tomography (MDCT) data of 11 patients (5 females and 6 males, median age: 67 years) who underwent MDCT twice (median interval between baseline and follow-up MDCT: 18 months) and sustained an incidental osteoporotic VF between baseline and follow-up scanning were used. Based on baseline MDCT data, two FSUs consisting of vertebral bodies and intervertebral discs (IVDs) were modeled: one standardly capturing L1-IVD–L2-IVD–L3 (FSU_L1–L3) and one modeling the incidentally fractured vertebral body at the center of the FSU (FSU_F). Furthermore, volumetric BMD (vBMD) derived from MDCT, FEM-based displacement, and FEM-based load of the single vertebrae L1 to L3 were determined. Statistically significant correlations (adjusted for a BMD ratio of fracture/L1–L3 segments) were revealed between the FSU_F and mean load of L1 to L3 (r = 0.814, p = 0.004) and the mean vBMD of L1 to L3 (r = 0.745, p = 0.013), whereas there was no statistically significant association between the FSU_F and FSU_L1–L3 or between FSU_F and the mean displacement of L1 to L3 (p > 0.05). In conclusion, FEM measurements of single vertebrae at the lumbar spine may be able to predict the biomechanical strength of incidentally fractured vertebral segments along the thoracolumbar spine, while FSUs seem to predict only segment-specific fracture risk.
机译:在临床常规期间对骨质疏松症相关的骨折风险的评估是基于对临床风险因素和T分数的评估,如来自面积骨密度(ABMD)的测量结果。然而,这些参数的能力受到在高骨折风险下识别患者的能力。有限元模型(FEMS)已显示出改善超过ABMD的骨强预测。本研究旨在调查腰椎的有限元测量是否可以预测沿胸腰椎椎间椎骨椎骨骨折(VFS)的功能性脊髓单元(FSU)的生物力学强度。多探测器计算机断层扫描(MDCT)11名患者(5名女性和6名男性,中位数:67岁)的数据(5名女中位数:67岁)两次(基线和后续MDCT之间的中位间隔:18个月)并持续到两者之间的偶然骨质疏松症VF使用基线和后续扫描。基于基线MDCT数据,模拟了由椎体和椎间盘(IVDS)组成的两个FSU:一个标准捕获L1-IVD-L2-IVD-L3(FSU_L1-L3)和一个在中心的偶然骨折椎体建模FSU(FSU_F)。此外,确定了来自MDCT,基于FEM基于FEM的位移和单个椎骨L1至L3的基于FEM基于FEM的位移和有限载荷的体积BMD(VBMD)。在FSU_F和L1至L3的平均负载(R = 0.814,p = 0.004)之间显示统计学上的显着相关性(调节骨折/ L1-L3段的BMD比率),并且L1至L3的平均VBMD(r = 0.745 ,P = 0.013),而FSU_F和FSU_L1-L3之间或FSU_F之间没有统计学上显着的关联,并且FSU_F与L1至L3的平均位移(P> 0.05)之间。总之,腰椎上单椎骨的有限元素测量可能能够能够预测沿胸腰椎的偶然破碎的椎间段的生物力学强度,而FSUS似乎只预测分段特异性的骨折风险。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号