首页> 美国卫生研究院文献>Materials >Water Absorption Properties of Geopolymer Foam after Being Impregnated with Hydrophobic Agents
【2h】

Water Absorption Properties of Geopolymer Foam after Being Impregnated with Hydrophobic Agents

机译:疏水剂浸渍后的高分子泡沫吸水性能。

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Geopolymer foam is classified as a lightweight material with high porous in its matrix which has great offer for applications requiring fire-resistant, thermal, and acoustic properties. However, the high sensitivity to humid environments can be a major barrier of geopolymer foam that limits the variety of applications of this material. Based on this drawback, two types of hydrophobic agent (Lukosil M130 and Lukofob ELX) were used as an impregnator to treat the surface of geopolymer foam samples. This paper presented the results of water absorption properties of the untreated and treated geopolymer foam composites. The obtained properties were flexural strength, compressive strength, density, total water absorption, the rate of water absorption, and water absorption coefficient. The results showed that the samples after being impregnated with hydrophobic agents improved significantly their waterproof property especially using Lukosil M130. Moreover, the samples treated with Lukosil M130 had positive impact on their mechanical strength.
机译:地质聚合物泡沫被归为一种轻质材料,其基体具有高孔隙率,非常适合要求耐火,导热和隔音性能的应用。但是,对潮湿环境的高敏感性可能是地质聚合物泡沫的主要障碍,从而限制了该材料的多种应用。基于这个缺点,使用两种疏水剂(Lukosil M130和Lukofob ELX)作为浸渍剂来处理地质聚合物泡沫样品的表面。本文介绍了未处理和已处理的地质聚合物泡沫复合材料吸水性能的结果。所获得的性质是抗弯强度,抗压强度,密度,总吸水率,吸水率和吸水系数。结果表明,用疏水剂浸渍后的样品尤其是使用Lukosil M130可以显着改善其防水性能。此外,用Lukosil M130处理过的样品对其机械强度具有积极影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号