A Proposed Scan Strategy Used on SLM Inner Structure Part

摘要

A model with an inner structure was designed to study the relationship between the surface quality of the inner structure and the scan strategy in this study. The test results showed that the precision of the inner structure was highly affected by the scan strategy, and the specimens printed using different strategies showed different performances on the surface quality of the inner structure. The specimen printed using the square-framed scan strategy had a lower flatness value on the positive face of the inner structure compared to that of the other two specimens printed using Z-shape scan strategies, while the specimen printed using the Z-shape scan strategy (along the inner structure) had a relative optimal surface roughness on the side surface of the inner structure in all three specimens. The bending deformation caused by the scan strategies was considered to be the main factor affecting the flatness on the positive surface, while laser energy fluctuation showed a significant impact on side surface roughness. Combined with the experimental data, a new scan strategy was proposed; we found that the specimen printed using this new strategy improved positive surface flatness and side surface roughness.