Effect of Multiscale Processing in Digital Chest Radiography on Automated Detection of Lung Nodule with a Computer Assistance System

摘要

The aim of this study is to evaluate the effect of multiscale processing in digital chest radiography on automated detection of lung nodule with a computer-aided diagnosis (CAD) system. The study involved 58 small-nodule patient cases and 58 normal cases. The 58 patient cases included a total of 64 noncalcified lung nodules up to 15 mm in diameter. Each case underwent an examination with a digital radiography system (Digital Diagnost, Philips Medical Systems), and the acquired image was processed by the following three types of multiscale processing (Unique Image Processing Package, Philips Medical Systems) respectively: (1) standard image from the default processing parameter (structure preference, 0.0), (2) high-pass image with structure preference of 0.4, (3) low-pass image with structure preference of −0.4. The CAD output images were produced with a real-time computer assistance system (IQQA™-Chest, EDDA Technology). Two experienced chest radiologists established the nodule gold standard by consensus reading according to computed tomography results, and analyzed and recorded the detection of lung nodules and false-positive detections of these CAD output images. For the entire cases involved (each case with three types of different processing), a total of 348 observations were evaluated by the receiver operating characteristic (ROC) analysis. The mean area under the ROC curve (>A>z) value was 0.700 for the standard images, 0.587 for the high-pass images, and 0.783 for the low-pass images. There were statistically significant >Az values among these three types of processed images (>p < 0.01). Multiscale processing in digital chest radiography can affect the automated detection of lung nodule by CAD, which is consistent with effects from visual inspection.