首页> 美国卫生研究院文献>other >Biomechanical Strain as a Trigger for Pore Formation in Schlemm’s Canal Endothelial Cells
【2h】

Biomechanical Strain as a Trigger for Pore Formation in Schlemm’s Canal Endothelial Cells

机译:生物力学应变触发Schlemm的血管内皮细胞中的孔形成

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The bulk of aqueous humor passing through the conventional outflow pathway must cross the inner wall endothelium of Schlemm’s canal (SC), likely through micron-sized transendothelial pores. SC pore density is reduced in glaucoma, possibly contributing to obstructed aqueous humor outflow and elevated intraocular pressure (IOP). Little is known about the mechanisms of pore formation; however, pores are often observed near dome-like cellular outpouchings known as giant vacuoles (GVs) where significant biomechanical strain acts on SC cells. We hypothesize that biomechanical strain triggers pore formation in SC cells. To test this hypothesis, primary human SC cells were isolated from three non-glaucomatous donors (aged 34, 44 and 68), and seeded on collagen-coated elastic membranes held within a membrane stretching device. Membranes were then exposed to 0%, 10% or 20% equibiaxial strain, and the cells were aldehyde-fixed 5 minutes after the onset of strain. Each membrane contained 3–4 separate monolayers of SC cells as replicates (N = 34 total monolayers), and pores were assessed by scanning electron microscopy in 12 randomly selected regions (~65,000 μm2 per monolayer). Pores were identified and counted by four independent masked observers. Pore density increased with strain in all three cell lines (p < 0.010), increasing from 87±37 pores/mm2 at 0% strain to 342±71 at 10% strain; two of the three cell lines showed no additional increase in pore density beyond 10% strain. Transcellular “I-pores” and paracellular “B-pores” both increased with strain (p < 0.038), however B-pores represented the majority (76%) of pores. Pore diameter, in contrast, appeared unaffected by strain (p = 0.25), having a mean diameter of 0.40 μm for I-pores (N = 79 pores) and 0.67 μm for B-pores (N = 350 pores). Pore formation appears to be a mechanosensitive process that is triggered by biomechanical strain, suggesting that SC cells have the ability to modulate local pore density and filtration characteristics of the inner wall endothelium based on local biomechanical cues. The molecular mechanisms of pore formation and how they become altered in glaucoma may be studied in vitro using stretched SC cells.
机译:穿过常规流出通道的大量房水必须穿过Schlemm运河(SC)的内壁内皮,可能穿过微米级的跨内皮孔。青光眼的SC孔密度降低,可能导致房水流出受阻和眼内压(IOP)升高。关于孔形成的机制知之甚少。但是,通常在圆顶状细胞外袋附近观察到毛孔,这些细胞外袋被称为巨空泡(GV),其中巨大的生物力学应变作用于SC细胞。我们假设生物力学应变触发SC细胞中的孔形成。为了验证这一假设,从三个非青光眼供体(年龄分别为34、44和68)中分离了原代人SC细胞,并将其接种在膜拉伸装置内的胶原蛋白涂覆的弹性膜上。然后将膜暴露于0%,10%或20%的等双轴应变,并在应变开始后5分钟将细胞用醛固定。每个膜都包含3-4个独立的SC细胞单层作为重复(N = 34个总单层),并通过扫描电子显微镜在12个随机选择的区域(每个单层〜65,000μm 2 )中评估孔。四个独立的蒙面观察者识别并计数了毛孔。在所有三种细胞系中,孔密度均随应变而增加(p <0.010),从0%应变时的87±37孔/ mm 2 增加到10%应变时的342±71。三个细胞系中的两个显示出超过10%应变的孔密度没有额外增加。跨细胞的“ I孔”和副细胞的“ B孔”均随菌株的增加而增加(p <0.038),但是B孔占了孔的大部分(76%)。相反,孔直径似乎不受应变影响(p = 0.25),I孔(N = 79孔)的平均直径为0.40μm,B孔(N = 350孔)的平均直径为0.67μm。孔的形成似乎是由生物力学应变触发的机械敏感过程,表明SC细胞具有根据局部生物力学线索调节局部孔密度和内壁内皮细胞过滤特性的能力。可以使用拉伸的SC细胞在体外研究孔形成的分子机制及其在青光眼中如何改变的机制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号