首页> 美国卫生研究院文献>other >Fourier rebinning and consistency equations for time-of-flight PET planograms
【2h】

Fourier rebinning and consistency equations for time-of-flight PET planograms

机译:飞行时间PET平面图的傅里叶重组和一致性方程

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Due to the unique geometry, dual-panel PET scanners have many advantages in dedicated breast imaging and on-board imaging applications since the compact scanners can be combined with other imaging and treatment modalities. The major challenges of dual-panel PET imaging are the limited-angle problem and data truncation, which can cause artifacts due to incomplete data sampling. The time-of-flight (TOF) information can be a promising solution to reduce these artifacts. The TOF planogram is the native data format for dual-panel TOF PET scanners, and the non-TOF planogram is the 3D extension of linogram. The TOF planograms is five-dimensional while the objects are three-dimensional, and there are two degrees of redundancy. In this paper, we derive consistency equations and Fourier-based rebinning algorithms to provide a complete understanding of the rich structure of the fully 3D TOF planograms. We first derive two consistency equations and John's equation for 3D TOF planograms. By taking the Fourier transforms, we obtain two Fourier consistency equations and the Fourier-John equation, which are the duals of the consistency equations and John's equation, respectively. We then solve the Fourier consistency equations and Fourier-John equation using the method of characteristics. The two degrees of entangled redundancy of the 3D TOF data can be explicitly elicited and exploited by the solutions along the characteristic curves. As the special cases of the general solutions, we obtain Fourier rebinning and consistency equations (FORCEs), and thus we obtain a complete scheme to convert among different types of PET planograms: 3D TOF, 3D non-TOF, 2D TOF and 2D non-TOF planograms. The FORCEs can be used as Fourier-based rebinning algorithms for TOF-PET data reduction, inverse rebinnings for designing fast projectors, or consistency conditions for estimating missing data. As a byproduct, we show the two consistency equations are necessary and sufficient for 3D TOF planograms. Finally, we give numerical examples of implementation of a fast 2D TOF planogram projector and Fourier-based rebinning for a 2D TOF planograms using the FORCEs to show the efficacy of the Fourier-based solutions.
机译:由于独特的几何形状,双面板PET扫描仪在专用乳房成像和车载成像应用中具有许多优势,因为紧凑型扫描仪可以与其他成像和治疗方式结合使用。双面板PET成像的主要挑战是角度限制问题和数据截断,由于数据采样不完整,可能会导致伪影。飞行时间(TOF)信息可能是减少这些伪像的有前途的解决方案。 TOF平面图是双面板TOF PET扫描仪的本机数据格式,非TOF平面图是线性图的3D扩展。 TOF平面图是五维的,而对象是三维的,并且有两个冗余度。在本文中,我们导出一致性方程和基于傅立叶的重新组合算法,以提供对完整3D TOF平面图的丰富结构的完整理解。我们首先导出3D TOF平面图的两个一致性方程和John方程。通过进行傅立叶变换,我们获得了两个傅立叶一致性方程和傅立叶-约翰方程,它们分别是一致性方程和约翰方程的对偶。然后,使用特征方法求解傅立叶一致性方程和傅立叶-约翰方程。沿着特征曲线的解可以明确地得出和利用3D TOF数据的两个纠缠冗余度。作为一般解决方案的特例,我们获得了傅里叶重整和一致性方程(FORCE),因此我们获得了一种在不同类型的PET平面图之间转换的完整方案:3D TOF,3D non-TOF,2D TOF和2D non- TOF平面图。 FORCE可以用作基于TOF-PET数据缩减的基于傅里叶的重新组合算法,用于设计快速投影仪的反向重新组合或用于估计丢失数据的一致性条件。作为副产品,我们显示出两个一致性方程对于3D TOF平面图而言是必要和充分的。最后,我们给出了快速2D TOF平面图投影仪的实现以及使用FORCE进行2D TOF平面图基于傅里叶的重新组合的数值示例,以显示基于傅里叶的解决方案的功效。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号