首页> 美国卫生研究院文献>other >Modeling crop residue burning experiments to evaluate smoke emissions and plume transport
【2h】

Modeling crop residue burning experiments to evaluate smoke emissions and plume transport

机译:对作物残渣燃烧实验进行建模以评估烟雾排放和烟羽的运输

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Crop residue burning is a common land management practice that results in emissions of a variety of pollutants with negative health impacts. Modeling systems are used to estimate air quality impacts of crop residue burning to support retrospective regulatory assessments and also for forecasting purposes. Ground and airborne measurements from a recent field experiment in the Pacific Northwest focused on cropland residue burning was used to evaluate model performance in capturing surface and aloft impacts from the burning events. The Community Multiscale Air Quality (CMAQ) model was used to simulate multiple crop residue burns with 2 km grid spacing using field-specific information and also more general assumptions traditionally used to support National Emission Inventory based assessments. Field study specific information, which includes area burned, fuel consumption, and combustion completeness, resulted in increased biomass consumption by 123 tons (60% increase) on average compared to consumption estimated with default methods in the National Emission Inventory (NEI) process. Buoyancy heat flux, a key parameter for model predicted fire plume rise, estimated from fuel loading obtained from field measurements can be 30% to 200% more than when estimated using default field information. The increased buoyancy heat flux resulted in higher plume rise by 30% to 80%. This evaluation indicates that the regulatory air quality modeling system can replicate intensity and transport (horizontal and vertical) features for crop residue burning in this region when region-specific information is used to inform emissions and plume rise calculations. Further, previous vertical emissions allocation treatment of putting all cropland residue burning in the surface layer does not compare well with measured plume structure and these types of burns should be modeled more similarly to prescribed fires such that plume rise is based on an estimate of buoyancy.
机译:作物残渣燃烧是一种常见的土地管理实践,会导致排放各种污染物,对健康产生负面影响。建模系统用于估算焚烧农作物残渣对空气质量的影响,以支持回顾性监管评估以及进行预测。来自西北太平洋地区最近的田间实验的地面和空中测量结果着重于农田残渣燃烧,用于评估模型在捕获燃烧事件引起的地面和高空撞击方面的性能。社区多尺度空气质量(CMAQ)模型用于使用田间特定信息以及传统上用于支持基于国家排放清单的评估的更一般的假设来模拟网格间距为2 km的多种农作物残渣燃烧。实地研究的特定信息(包括燃烧面积,燃料消耗和燃烧完整性)导致与国家排放清单(NEI)流程中默认方法估算的消耗相比,平均生物量消耗增加了123吨(增加了60%)。根据现场测量获得的燃料负荷估算出的浮力热通量是模型预测的火焰羽流上升的关键参数,比使用默认现场信息进行估算时要高出30%至200%。浮力热通量的增加导致羽流增加了30%至80%。该评估表明,当使用区域特定信息来指导排放量和羽流上升计算时,管制空气质量建模系统可以复制该区域农作物残渣燃烧的强度和运输(水平和垂直)特征。此外,以前的垂直排放分配处理将所有农田残渣燃烧都置于表层,与测量的羽状结构并不能很好地比较,这些燃烧类型应与规定的火灾更相似,以使羽状上升基于浮力的估算。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号