首页> 美国卫生研究院文献>Behavioral and Brain Functions : BBF >Simultaneity in the millisecond range as a requirement for effective shape recognition
【2h】

Simultaneity in the millisecond range as a requirement for effective shape recognition

机译:有效识别形状的要求必须在毫秒范围内同步

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Neurons of the visual system are capable of firing with millisecond precision, and synchrony of firing may provide a mechanism for "binding" stimulus elements in the image for purposes of recognition. While the neurophysiology is suggestive, there has been relatively little behavioral work to support the proposition that synchrony contributes to object recognition. The present experiments examined this issue by briefly flashing dots that were positioned at the outer boundary of namable objects, similar to silhouettes. Display of a given dot lasted only 0.1 ms, and temporal proximity of dot pairs, and among dot pairs, was varied as subjects were asked to name each object. In Exp 1, where the display of dots pairs was essentially simultaneous (0.2 ms to show both), there was a linear decline in recognition of the shapes as the interval between pairs increased from 0 ms to 6 ms. Compared with performance at 0 ms of delay, even the 2 ms interval between pairs produced a significant decrease in recognition. In Exp 2 the interval between pairs was constant at 3 ms, and the interval between pair members was varied. Here also a linear decline was observed as the interval between pair members increased from 0 ms to 1.5 ms, with the difference between 0 ms and 0.5 ms being significant. Thus minimal transient discrete cues can be integrated for purposes of shape recognition to the extent that they are synchronously displayed, and coincidence in the millisecond and even submillisecond range is needed for effective encoding of image data.
机译:视觉系统的神经元能够以毫秒精度发射,并且发射的同步性可以提供一种机制,用于“结合”图像中的刺激元素以用于识别。虽然神经生理学是暗示性的,但很少有行为工作来支持同步有助于物体识别的观点。本实验通过短暂闪烁位于可命名对象外边界(类似于轮廓)的点来检查此问题。给定点的显示仅持续0.1 ms,随着要求对象命名每个对象,点对以及点对之间的时间接近度会发生变化。在Exp 1中,点对的显示基本上是同时进行的(0.2 ms表示两个点),随着对之间的间隔从0 ms增加到6 ms,形状的识别呈线性下降。与0 ms延迟时的性能相比,即使两对之间的2 ms间隔也会导致识别率显着降低。在Exp 2中,线对之间的间隔恒定为3 ms,而线对成员之间的间隔则变化。在此,随着配对成员之间的间隔从0毫秒增加到1.5毫秒,还观察到了线性下降,0毫秒和0.5毫秒之间的差异很明显。因此,为了形状识别的目的,可以将最小的瞬时离散提示集成到同步显示的程度,并且对于图像数据的有效编码需要毫秒甚至亚毫秒范围内的一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号