Data for in-situ industrial site characterization with the applications of combined subsurface and surface mapping

摘要

The paper presents the data from the surface and subsurface mapping of this area for the purpose of siting industrial city in the area. The field data collected combine with the borehole data was to successfully apply these to solving geological, environmental and engineering complications posed by the complexity of the subsurface geological structures underlain this area. The Electrical Resistivity, (ER) and Induced Polarization, (IP) data were initially processed using RES2DINV software model to generate the depth to the lithological units together with topographic correction. The 2-D ER and IP data were collected from 23rd April 2017 up until 7th May 2017 covering a total of about 17.6 km along 44 survey lines using ABEM Terrameter SAS4000 for the field measurement. A total of 20 Borehole logs data were recorded to better characterized in-situ, the subsurface geological formations emplaced in the study area. The study area is located at Bagan Datuk, Perak Darul Ridzuan situated on Latitude 2° 44.653'N and Longitudes 104° 28.79' E along the west coast Peninsula Malaysia. The topography of the area is generally flat low–laying and elevation range from about 0 m to 32 m above mean sea level (MSL).