首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >Identification of Earthquake Induced Damage Areas Using Fourier Transform and SPOT HRVIR Pan Images
【2h】

Identification of Earthquake Induced Damage Areas Using Fourier Transform and SPOT HRVIR Pan Images

机译:利用傅立叶变换和SPOT HRVIR全景影像识别地震造成的破坏区域

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A devastating earthquake with a magnitude of Mw 7.4 occurred on the North Anatolian Fault Zone (NAFZ) of Turkey on August 17, 1999 at 00:01:39 UTC (3:01 a.m. local time). The aim of this study is to propose a new approach to automatically identify earthquake induced damage areas which can provide valuable information to support emergency response and recovery assessment procedures. This research was conducted in the Adapazari inner city, covering a 3 × 3 km area, where 11,373 buildings collapsed as a result of the earthquake. SPOT high resolution visible infrared (HRVIR) Pan images obtained before (25 June 1999) and after (4 October 1999) the earthquake were used in the study. Five steps were employed to conduct the research and these are: (i) geometric and radiometric correction of satellite images, (ii) Fast Fourier Transform (FFT) of pre- and post-earthquake images and filtering the images in frequency domain, (iii) generating difference image using Inverse Fast Fourier Transform (IFFT) pre- and post- earthquake images, (iv) application of level slicing to difference image to identify the earthquake-induced damages, (v) accuracy assessment of the method using ground truth obtained from a 1/5,000 scale damage map. The total accuracy obtained in the research is 80.19 %, illustrating that the proposed method can be successfully used to automatically identify earthquake-induced damage areas.
机译:1999年8月17日世界标准时间00:01:39(当地时间上午3:01)在土耳其北安那托利亚断层带(NAFZ)发生了7.4 Mw级毁灭性地震。这项研究的目的是提出一种自动识别地震引起的破坏区域的新方法,该方法可以提供有价值的信息以支持应急响应和恢复评估程序。这项研究是在Adapazari内城进行的,该城覆盖了3×3 km的区域,有11373座建筑物因地震而倒塌。本研究使用了地震前(1999年6月25日)和地震后(1999年10月4日)获得的SPOT高分辨率可见红外(HRVIR)Pan图像。研究采用了五个步骤,它们是:(i)卫星图像的几何和辐射校正,(ii)地震前后图像的快速傅立叶变换(FFT)并在频域中对图像进行滤波,(iii )使用地震前和地震后的快速傅里叶逆变换(IFFT)生成差异图像,(iv)将水平切片应用于差异图像以识别地震造成的破坏,(v)使用获得的地面真实性对该方法的准确性进行评估从1 / 5,000比例伤害图上。该研究获得的总准确度为80.19%,说明该方法可成功用于自动识别地震引起的破坏区域。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号