首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >A Novel Vehicle Classification Using Embedded Strain Gauge Sensors
【2h】

A Novel Vehicle Classification Using Embedded Strain Gauge Sensors

机译:使用嵌入式应变计传感器的新型车辆分类

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This paper presents a new vehicle classification and develops a traffic monitoring detector to provide reliable vehicle classification to aid traffic management systems. The basic principle of this approach is based on measuring the dynamic strain caused by vehicles across pavement to obtain the corresponding vehicle parameters – wheelbase and number of axles – to then accurately classify the vehicle. A system prototype with five embedded strain sensors was developed to validate the accuracy and effectiveness of the classification method. According to the special arrangement of the sensors and the different time a vehicle arrived at the sensors one can estimate the vehicle's speed accurately, corresponding to the estimated vehicle wheelbase and number of axles. Because of measurement errors and vehicle characteristics, there is a lot of overlap between vehicle wheelbase patterns. Therefore, directly setting up a fixed threshold for vehicle classification often leads to low-accuracy results. Using the machine learning pattern recognition method to deal with this problem is believed as one of the most effective tools. In this study, support vector machines (SVMs) were used to integrate the classification features extracted from the strain sensors to automatically classify vehicles into five types, ranging from small vehicles to combination trucks, along the lines of the Federal Highway Administration vehicle classification guide. Test bench and field experiments will be introduced in this paper. Two support vector machines classification algorithms (one-against-all, one-against-one) are used to classify single sensor data and multiple sensor combination data. Comparison of the two classification method results shows that the classification accuracy is very close using single data or multiple data. Our results indicate that using multiclass SVM-based fusion multiple sensor data significantly improves the results of a single sensor data, which is trained on the whole multisensor data set.
机译:本文提出了一种新的车辆分类,并开发了一种交通监控检测器,以提供可靠的车辆分类以辅助交通管理系统。这种方法的基本原理基于测量车辆在人行道上引起的动态应变,以获得相应的车辆参数(轴距和轴数),然后对车辆进行准确分类。开发了具有五个嵌入式应变传感器的系统原型,以验证分类方法的准确性和有效性。根据传感器的特殊布置和车辆到达传感器的不同时间,可以准确地估计车辆的速度,这对应于估计的轴距和轴数。由于测量误差和车辆特性,轴距图之间存在很多重叠。因此,直接设置用于车辆分类的固定阈值通常会导致准确性较低的结果。使用机器学习模式识别方法来解决此问题被认为是最有效的工具之一。在这项研究中,支持向量机(SVM)用于整合从应变传感器提取的分类特征,以按照联邦公路管理局车辆分类指南将车辆自动分类为五种类型,从小型车辆到组合卡车。本文将介绍测试台和现场实验。两种支持向量机分类算法(一对一,一对一)用于对单个传感器数据和多个传感器组合数据进行分类。两种分类方法结果的比较表明,使用单个数据或多个数据的分类精度非常接近。我们的结果表明,使用基于多类SVM的融合,多个传感器数据可显着改善单个传感器数据的结果,该数据在整个多传感器数据集上进行训练。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号