首页> 美国卫生研究院文献>Science Advances >Dehydration of chlorite explains anomalously high electrical conductivity in the mantle wedges
【2h】

Dehydration of chlorite explains anomalously high electrical conductivity in the mantle wedges

机译:亚氯酸盐的脱水解释了地幔楔中异常高的电导率

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Mantle wedge regions in subduction zone settings show anomalously high electrical conductivity (~1 S/m) that has often been attributed to the presence of aqueous fluids released by slab dehydration. Laboratory-based measurements of the electrical conductivity of hydrous phases and aqueous fluids are significantly lower and cannot readily explain the geophysically observed anomalously high electrical conductivity. The released aqueous fluid also rehydrates the mantle wedge and stabilizes a suite of hydrous phases, including serpentine and chlorite. In this present study, we have measured the electrical conductivity of a natural chlorite at pressures and temperatures relevant for the subduction zone setting. In our experiment, we observe two distinct conductivity enhancements when chlorite is heated to temperatures beyond its thermodynamic stability field. The initial increase in electrical conductivity to ~3 × 10−3 S/m can be attributed to chlorite dehydration and the release of aqueous fluids. This is followed by a unique, subsequent enhancement of electrical conductivity of up to 7 × 10−1 S/m. This is related to the growth of an interconnected network of a highly conductive and chemically impure magnetite mineral phase. Thus, the dehydration of chlorite and associated processes are likely to be crucial in explaining the anomalously high electrical conductivity observed in mantle wedges. Chlorite dehydration in the mantle wedge provides an additional source of aqueous fluid above the slab and could also be responsible for the fixed depth (120 ± 40 km) of melting at the top of the subducting slab beneath the subduction-related volcanic arc front.
机译:俯冲带设置中的地幔楔形区域显示出异常高的电导率(〜1 S / m),这通常归因于板坯脱水释放出的含水流体的存在。基于实验室的水相和水性流体电导率测量值明显较低,无法轻易地解释地球物理观测到的异常高的电导率。释放的含水流体还会使地幔楔再水化,并稳定包括蛇纹石和亚氯酸盐在内的一系列含水相。在本研究中,我们测量了在与俯冲带设定有关的压力和温度下天然亚氯酸盐的电导率。在我们的实验中,当亚氯酸盐被加热到超过其热力学稳定性场的温度时,我们观察到两种明显的电导率增强。最初电导率增加到〜3×10 −3 S / m可以归因于亚氯酸盐的脱水和水性流体的释放。接下来是独特的,随后的电导率提高,最高可达7×10 -1 S / m。这与高导电和化学不纯的磁铁矿矿物相的互连网络的增长有关。因此,亚氯酸盐的脱水和相关过程可能对于解释地幔楔中异常高的电导率至关重要。地幔楔中的亚氯酸盐脱水为板坯上方提供了额外的含水流体来源,也可能是与俯冲有关的火山弧前缘下方的俯冲板顶部的固定融化深度(120±40 km)的原因。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号