首页> 美国卫生研究院文献>Nanomaterials >Facile Synthesis of Ternary Alloy of CdSe1-xSx Quantum Dots with Tunable Absorption and Emission of Visible Light
【2h】

Facile Synthesis of Ternary Alloy of CdSe1-xSx Quantum Dots with Tunable Absorption and Emission of Visible Light

机译:具有可见光可调吸收和发射的CdSe1-xSx量子点三元合金的简易合成

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The synthesis of alloyed semiconductor quantum dots has produced structures that have distinct properties in comparison with both their bulk counterparts and their parent binary semiconductor quantum dots. In this work, the quantum confined structures of a ternary alloy of CdSe1−xSx were synthesized by one-pot synthesis method in an aqueous medium at a low temperature and capped with 3-mercaptopropoionic acid. Structures of the synthesized quantum dots were investigated by energy dispersive X-ray, X-ray diffraction, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The obtained quantum dots had modified cubic structures as proven by X-ray diffraction and selected area electron diffraction. The optical properties of the synthesized quantum dots were characterized by optical absorption, photoluminescence, and color analysis. Optical absorption investigation revealed a widening of the band gap of CdSe1−xSx with increasing S content. This widening increased for the samples suspended in water relative to the samples measured in powder form due to the difference in the environment of the two cases. The size determined from the optical absorption measurements was found to be compatible with the sizes obtained from the X-ray diffraction with the value of bowing parameter around 1, which indicated a graded diffusion of sulfur. It was also ascertained that the emission of different compositions covered the most visible range with a small full width at half maximum. The x and y values of the chromaticity coordinates decreased with increasing sulfur content of up to 15%, while the z value increased.
机译:合金化半导体量子点的合成所产生的结构与其体相对应物和其母体二元半导体量子点相比具有不同的特性。在这项工作中,CdSe1-xSx三元合金的量子约束结构是通过一锅合成法在低温水性介质中合成的,并用3-巯基丙酸封端。通过能量色散X射线,X射线衍射,X射线光电子能谱和高分辨率透射电子显微镜研究了合成的量子点的结构。如通过X射线衍射和选择区域电子衍射所证明的,所获得的量子点具有改性的立方结构。合成的量子点的光学性质通过光吸收,光致发光和颜色分析来表征。光吸收研究表明,随着S含量的增加,CdSe1-xSx的带隙变宽。相对于粉末形式的样品,由于两种情况的环境差异,悬浮在水中的样品的宽度增加。发现由光吸收测量确定的尺寸与由X射线衍射获得的尺寸兼容,弯曲参数的值在1附近,这表明硫的梯度扩散。还确定了不同组成的发射覆盖了最可见的范围,具有小的半峰全宽。色度坐标的x和y值随着硫含量的增加而降低,最高可达15%,而z值则增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号