首页> 美国卫生研究院文献>Molecules >Design of Composite Photocatalyst of TiO2 and Y-Zeolite for Degradation of 2-Propanol in the Gas Phase under UV and Visible Light Irradiation
【2h】

Design of Composite Photocatalyst of TiO2 and Y-Zeolite for Degradation of 2-Propanol in the Gas Phase under UV and Visible Light Irradiation

机译:紫外可见光辐射下TiO2-Y沸石复合光催化剂在气相中降解2-丙醇的设计

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Hydrophobic Y-zeolite (SiO2/Al2O3 = 810) and TiO2 composite photocatalysts were designed by using two different types of TiO2 precursors, i.e., titanium ammonium oxalate and ammonium hexafluorotitanate. The porous structure, surface property and state of TiO2 were investigated by various characterization techniques. By using an ammonium hexafluorotitanate as a precursor, hydrophobic modification of the Y-zeolite surface and realizing visible light sensitivity was successfully achieved at the same time after calcination at 773 K in the air. The prepared sample still maintained the porous structure of Y-zeolite and a large surface area. Highly crystalline anatase TiO2 was also formed on the Y-zeolite surface by the role of fluorine in the precursor. The usages of ammonium hexafluorotitanate were effective for the improvement of the photocatalytic performance of the composite in the degradation of 2-propanol in the gas phase under UV and visible light (λ > 420 nm) irradiation.
机译:通过使用两种不同类型的TiO2前驱体,即草酸钛铵和六氟钛酸铵,设计了疏水性Y沸石(SiO2 / Al2O3 = 810)和TiO2复合光催化剂。通过各种表征技术研究了TiO2的多孔结构,表面性质和状态。通过使用六氟钛酸铵作为前体,在空气中于773 K煅烧后,成功地实现了Y沸石表面的疏水改性并实现了可见光灵敏度。所制备的样品仍保持Y型沸石的多孔结构和较大的表面积。由于氟在前体中的作用,Y沸石表面还形成了高度结晶的锐钛矿型TiO2。六氟钛酸铵的使用有效地改善了复合物在紫外和可见光(λ> 420 nm)照射下气相中2-丙醇降解中的光催化性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号