首页> 外文期刊>中国有色金属学报(英文版) >Influence of microcrystalline wax on properties of MIM multi-component wax matrix binder
【24h】

Influence of microcrystalline wax on properties of MIM multi-component wax matrix binder

机译:微晶蜡对MIM多组分蜡基粘合剂性能的影响

获取原文
获取原文并翻译 | 示例
       

摘要

The properties of PW-EVA-HDPE binder with the addition of MW were studied. It shows that the addition of MW from 1% to 20%(mass fraction) causes an increase in the tensile strength and a decrease in shrinkage of the binder. After blending PW with MW, the crystallation behavior of wax base changes, which results in fine grain for the binder and more isotropic microstructure for the feedstock. The powder loading capacity increases and homogeneity of feedstock becomes better. The reason of the modification is also discussed.
机译:研究了添加MW的PW-EVA-HDPE粘合剂的性能。结果表明,从1%至20%(质量分数)的MW的添加引起拉伸强度的增加和粘合剂的收缩的减小。将PW与MW混合后,蜡基的结晶行为发生变化,这导致粘合剂的晶粒细小,原料的微观结构更加各向同性。粉末装载量增加并且原料的均质性变得更好。还讨论了修改的原因。

著录项

  • 来源
    《中国有色金属学报(英文版)》 |2002年第005期|918-921|共4页
  • 作者单位

    State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;

    State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;

    State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;

    State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;

  • 收录信息 中国科学引文数据库(CSCD);
  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 TF124.39;
  • 关键词

    metal injection molding(MIM); binder; rheological behavior;

    机译:金属注射成型;粘结剂;流变行为;
  • 入库时间 2022-08-19 03:34:36
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号