Stress—strain curves for different loading paths and yield loci of aluminum alloy sheets

摘要

＜正＞To carry out biaxial tensile test in sheet metal, the biaxial tensile testing system was established. True stress—true strain curves of three kinds of aluminum alloy sheets for loading ratios of 4:1, 4:2, 4:3, 4:4, 3:4, 2:4 and 1:4 were obtained by conducting biaxial tensile test in the established testing systems. It shows that the loading path has a significant influence on the stress—strain curves and as the loading ratio increases from 4:1 to 4:4, the stress—strain curve becomes higher and n-value becomes larger. Experimental yield points for three aluminum alloy sheets from 0.2% to 2% plastic strain were determined based on the equivalent plastic work. And the geometry of the experimental yield loci were compared with the yield loci calculated from several existing yield criteria. The analytical result shows that the Barlat89 and Hosford yield criterion describe the general trends of the experimental yield loci of aluminum alloy sheets well, whereas the Mises yield criterion overestimates the yield stress in all the contours.