首页> 外文期刊>中国有色金属学报(英文版) >Preparation of ultrafine nickel powder by wet chemical process
【24h】

Preparation of ultrafine nickel powder by wet chemical process

机译:湿化学法制备超细镍粉

获取原文
获取原文并翻译 | 示例
           

摘要

The main technical problems of nickel powder for multiplayer ceramic capacitors are particle size controlling, the agglomeration and tap density. Ultrafine nickel powders with submicron size and spherical shape were synthesized by the hydrazine reduction of nickel sulfate in ethanol-water solvent. The effects of reaction temperature, nucleator and flow rate of nickel sulfate solution on nickel powders properties were investigated. The nickel particles synthesized were characterized by SEM and TGA. The results show that the average particle size changes from 0.1 to 0.7 μm by adjusting reaction temperature (53-73 ℃) and flow rate of nickel sulfate solution (50-100 mL/min). Moreover, temperature below 60 ℃ and appropriate flow rate of nickel sulfate solution (85 mL/min) are in favor of obtaining particles with high tap density (>3.0 g/cm3). In addition, the introduction of nucleator is useful to obtaining particles with narrow size distribution.
机译:多人陶瓷电容器镍粉的主要技术问题是粒度控制,聚集和振振密度。通过乙醇 - 水溶剂中的硫酸镍的肼还原合成具有亚微米尺寸和球形的超细镍粉。研究了反应温度,核核溶液对镍粉体性能的影响。合成的镍颗粒的特征在于SEM和TGA。结果表明,通过调节反应温度(53-73℃)和硫酸镍溶液(50-100mL / min)的流速,平均粒度从0.1〜0.7μm变化。此外,温度低于60℃,硫酸镍溶液(85ml / min)的适当流速有利于获得具有高振动密度(> 3.0g / cm3)的颗粒。此外,核核的引入可用于获得具有窄尺寸分布的颗粒。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号