首页> 中文期刊> 《中国有色金属学报(英文版)》 >Tensile properties of as-deformed 2A50 aluminum alloy in semi-solid state

Tensile properties of as-deformed 2A50 aluminum alloy in semi-solid state

         

摘要

Tensile properties of as-deformed 2A50 aluminum alloy were investigated in the high temperature solid and semi-solid states.The results show that temperature has almost no effect on the maximum tensile stress between 500 °C and 530 °C, and the maximum tensile stress decreases rapidly when the temperature is above 532 °C.The ductility decreases with increasing temperature and has an obvious fall when the temperature is above solidus temperature.This alloy almost has no ductility above 537 °C, and cannot sustain tensile stress above 550 °C.A brittle temperature range in which this alloy is prone to form microcracks was derived.The relation between microstructure, fraction solid and tensile properties were also investigated by examining the metallograph and fracture surface morphology of tested specimens, which could provide reference for forecasting the microcracks in this alloy occurring in semi-solid processing.

著录项

  • 来源
    《中国有色金属学报(英文版)》 |2010年第009期|1597-1602|共6页
  • 作者单位

    School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;

    State Key Laboratory for Fabrication and Processing of Nonferrous Metals, General Research Institute for Nonferrous Metals, Beijing 100088, China;

    School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;

    School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;

    State Key Laboratory for Fabrication and Processing of Nonferrous Metals, General Research Institute for Nonferrous Metals, Beijing 100088, China;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类
  • 关键词

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号