Bismuth-telluride-based alloys are the best thermoelectric materials used in commercial solid-state refrigeration near room temperature.Nevertheless,for n-type polycrystalline alloys,their thermoelectric figure of merit(zT) values at room temperature are often less than1.0,due to the high electron concentration originating from the donor-like effect induced by the mechanical deformation process.Herein,carrier concentration for better performance near room temperature was optimized through manipulating intrinsic point defects by sulfur alloying.Sulfur alloying significantly decreases antisite defects concentration and suppresses donor-like effect,resulting in optimized carrier concentration and reduced electronic thermal conductivity.The hot deformation process was also applied to improve carrier mobility due to the enhanced texture.As a result,a high zT value of 1 at 300 K and peak zT value of 1.1 at 350 K were obtained for the twice hot-deformed Bi_(2) Te_(2.7)Se_(0.21)S_(0.09) sample,which verifies sulfur alloying is an effective method to improve thermoelectric performance of n-type polycrystalline Bi2 Te3-based alloys near room temperature.
展开▼
