A promising duplex coating was prepared by microarc oxidation(MAO) and enameling processes onto polished Ti6A14V alloy. The TiO_2 ceramic coating deposited by MAO was characterized and then combined with an enameling treatment in order to improve the tribological and corrosion resistance of Ti6A14V alloy. The morphology, phase composition, and hardness of MAO and MAO/enameling-coated Ti6A14V alloy were evaluated by scanning electron microscopy(SEM), X-ray diffraction(XRD), and Vickers microhardness tester, respectively.The tribological performance was investigated using a ballon-disk tribometer. The corrosion resistance was studied using immersion tests and potentiodynamic polarization.Wear tests show that the enamel coating on the MAOcoated surface causes a reduction in the friction coefficient.Immersion tests demonstrate that the duplex coating is more effective in improving the corrosion resistance of Ti6A14V than the MAO coating especially at high temperature(80 ℃). Potentiodynamic polarization curves reveal that the corrosion potential of the duplex coating increases by about 250 mV and the corrosion current density is slightly lower than that of the MAO coating. The duplex coating is superior to the stand-alone MAO coating in improving the tribological and corrosion behavior of Ti6A14V.
展开▼
