With rapid economic development in China,demand for energy and transportation is growing.Due to the limitations of factors such as terrain and traffic,a large number of buried oil and gas pipelines are parallel to highvoltage transmission lines and electrified railways over long distances.Alternating current(AC) corrosion of pipelines is very serious in such cases.In this work,laboratory experiments were carried out with an electrochemical method in a simulated soil solution at various AC current densities from 0 to 200 A/m^2 and AC frequencies from 10 to 200 Hz.Experimental results indicated that with an increase in the AC current density,the corrosion potential of an X60 steel electrode shifted negatively,the anodic current density increased significantly,and the corrosion rate increased.Moreover,with an increase in the AC frequency,the corrosion potential of the X60 electrode shifted positively and the anodic current density decreased,which led to a decrease in the corrosion rate.Furthermore,the morphology of X60 electrodes indicated that uniform corrosion occurred at a low AC current density;while corrosion pits were found on the X60 electrode surface at a high AC current density,and deep corrosion pits seriously damaged the pipelines and might lead to leakage.
展开▼
