Experimental investigations of granular shape effects on the generation of electrostatic charge

摘要

In solid processing systems,electrostatic problems are commonly observed for granules of various shapes.However,a complete understanding of the basic dependence of electrostatic charge generation on particle shape has yet to be established.This observation motivated the present study on examining the effect of granular shape on electrostatics.In this study,polyvinyl chloride(PVC) granules(diameter 1.1-4.1 mm,in the shape of a triangle or trapezium) were first discharged to remove any residual charges and subsequently their electrostatic charging characteristics were studied by allowing a granule to slide along a pipe wall.Several factors such as granular front-facing angle,length-ratio,sliding area,sliding orientation,sliding times,and relative humidity were considered when studying their effects on the electrostatic charging of granules.It was found that triangular granules with smaller front-facing angles tended to generate more electrostatic charge.The amount of electrostatic charge increased with granular lengthratio and sliding area but decreased with humidity.In addition,granular sliding in the orientation of the front-facing angle(for triangular granules) or the short side(for trapezoidal granules) generated more electrostatic charge than that in the orientation of the long side.For both granule shapes,the electrostatic charge increased with granular sliding times and reached a saturated state after around 8-9 sliding movements.The saturated electrostatic charge increased with either granular length ratio or sliding area.