首页> 外文期刊>天然气化学(英文版) >Preparation of Carbon Nanotubes from Methane on Ni/Cu/A1 Catalyst
【24h】

Preparation of Carbon Nanotubes from Methane on Ni/Cu/A1 Catalyst

机译:Ni / Cu / A1催化剂上由甲烷制备碳纳米管

获取原文
获取原文并翻译 | 示例
       

摘要

A series of Ni/Cu/Al catalyst samples were prepared by the co-precipitation method. Carbon nanotubes with large inner diameters are successfully synthesized from methane on Ni/Cu/Al catalyst by adding sodium carbonate. The effects of the copper content and amounts of sodium carbonate on the morphology and microstructures of carbon nanotubes were investigated by CO adsorption and TEM technique. The experimental results showed that copper can influence both the catalytic activity and catalyst life. Best result was obtained when the copper content was 15%. Addition of sodium carbonate favors the formation of carbon nanotubes with large inner diameters. The growth mechanism of carbon nanotubes with large inner diameter is discussed.
机译:通过共沉淀法制备了一系列Ni / Cu / Al催化剂样品。通过加入碳酸钠在Ni / Cu / Al催化剂上由甲烷成功地合成了大内径的碳纳米管。通过CO吸附和TEM技术研究了铜含量和碳酸钠含量对碳纳米管形貌和微观结构的影响。实验结果表明,铜可以同时影响催化活性和催化剂寿命。当铜含量为15%时,可获得最佳结果。碳酸钠的加入有利于形成具有大内径的碳纳米管。讨论了内径较大的碳纳米管的生长机理。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号