Rotating discs are the vital part of many types of machineries.Usually there is a tendency to make use of them in higher rotational speeds,but ahead of their complete break down the incidence of vibration,plastic failure or creep relaxation can create serious damages which finally prevent the increase of the rotational speed.The invention of new materials has provided new opportunities to increase the loading capacity and speed of the discs.Functionally graded materials(FGMs)are a kind of new materials utilized in the construction of rotating discs.Consequently an important aspect in the analyses of heterogeneous FGM discs is the study of their creep relaxation.One of the well known constitutive equations for the modeling of creep phenomenon is known as the Sherby's law.Based on the steady state creep,the behavior of a variety of FGM rotating discs are studied.The analysis considers the conditions in which the distribution of volume fraction follows a power-law pattern.The required mathematical model and its solution for the analysis of stress and creep strain rate is represented.Some case studies are considered in which the effects of nonlinearly distributed volume fractions are studied.In the case studies,the analysis of rotating FGM discs made of Aluminum-Silicon Carbide compounds is considered.Besides,the analyses of discs with outside tractions are considered and the effects of typical material compositions upon the creep deformations are studied.For instance,the investigation discloses the significance of the use of FGM hubs in the turbine constructions.
展开▼
