Accurate calculations of losses associated with the operation of magnetic bearings are particularly important for high speed applications where the rotor losses are expected to be large and for some particular applications where even low power losses will be critical. Power losses in the magnetic thrust bearing is often neglected, but if there is misaligned in the rotor and bearing, the magnetic field in the thrust bearing is no longer axisymmetric one, or the dynamic control current in the winding is time dependent one, eddy currents are caused to flow inside the conducting material, then the power losses are very important for magnetic bearing design. This paper presents an analytical model of a thrust magnetic bearing, and the magnetic fields, forces and losses of thrust magnetic bearing are calculated. In the calculations the frequency of dynamic control current is up to 1000Hz, rotating speed is from 60rpm to 1200rpm, and the non-linearity of material is also taken into consideration. The results shows that if the magnetic field is not saturation, the eddy losses is proportional to dynamic control current frequency and a square function of dynamic control current, and also 5/2 power function of shaft's speed.
展开▼