In an effort to find the effect of mass transfer, surface tension and drag forces on the velocity distribution, the mathematical model of the velocity profile of a nascent hollow fiber during membrane formation in the air gap region was numerically simulated by using the Runge-Kutta method (fourth-order method). The effect of mass transfer on velocity distribution based on the complicated function (G(Ch8)) was presented and the effects of a complicated function were studied in two cases: in the first case, G (Ch8) was constant; in the second, G (Ch8) was variable. The latter was done by varying with the concentration of solvent in a nascent hollow fiber through the air-gap region. One empirical equation was used to describe this change and the predicted values had a better agreement with the experimental values. To verify the model hypotheses, hollow fiber membranes were spun from 20:80 polybenzimidazole/polyetherimide dopes with 25.6 wt% solid in N, N-dimethylacetamide (DMAc) using water as the external and internal coagulants. Based on the experimental results of dry-jet wet-spinning process for the fabrication of hollow fiber membranes, it is found that the model calculated values were in a good agreement with the experimental values.
展开▼
