首页> 外文期刊>兵工学报(英文版) >Crashworthiness performance of hybrid kenaf/glassfiber reinforced epoxy tube on winding orientation effect under quasi-staticcompression load
【24h】

Crashworthiness performance of hybrid kenaf/glassfiber reinforced epoxy tube on winding orientation effect under quasi-staticcompression load

机译:洋麻/玻璃纤维混合环氧树脂管在准静态压缩载荷下对绕组取向效应的耐撞性

获取原文
获取原文并翻译 | 示例
       

摘要

This research was aimed to study the effect winding orientation on the crashworthiness performance of hybrid tube.The specimens tested under quasi-static compression load involve of three winding parameters(q?30,45and 70)of hybrid kenaf/glass fiber reinforced epoxy and glass fiber reinforced epoxy as contrast specimen.The automated filament winding technique has been used in fabrication of hybrid and non-hybrid composite tube and crashworthiness performance was investigated experimentally.The effects of winding orientation on energy absorption capabilities and crashworthiness characteristic were investigated through quasi-static compression load and the result are compared with the glass fiber composite tube to justify the capability of hybrid natural/synthetic as energy absorption application.Hybridized samples proved to enhancing the progressive crushing capability as combination of local buckling,delaminate and brittle fracturing as progressive crushing modes.In the view of winding orientation aspect,the results of high winding orientation of hybrid composite tube elevated the crush load efficiency,specific energy absorption and energy absorption capability compared to glass composite tube(GFRP).The hybrid kenaf/glass composite tube with high winding orientation showed the best winding orientation to enhance the energy absorber characteristics as energy absorption application.

著录项

  • 来源
    《兵工学报(英文版)》 |2020年第5期|1051-1061|共11页
  • 作者单位

    Advanced Engineering Materials and Composites Research Centre Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia 43400 UPM Serdang Selangor Malaysia;

    Advanced Engineering Materials and Composites Research Centre Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia 43400 UPM Serdang Selangor Malaysia;

    Laboratory of Biocomposite Technology Institute of Tropical Forestry and Forest Products (INTROP) Universiti Putra Malaysia 43400 UPM Serdang Selangor Malaysia;

    Advanced Engineering Materials and Composites Research Centre Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia 43400 UPM Serdang Selangor Malaysia;

    Advanced Engineering Materials and Composites Research Centre Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia 43400 UPM Serdang Selangor Malaysia;

    Department of Mechanical Engineering Universiti Teknologi Petronas 32610 Seri Iskandar Perak Malaysia;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-19 04:44:13
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号